• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Voice of music VM5282 (chassis 20018)

Patrice B

AK Subscriber
Subscriber
Hello,

Bought from that Auction site, not here yet...

Anyway, no mention anywhere of this particular model (console). VM5282 (chassis 20018). Nothing in the models listen on the VM dedicated site (I've contacted the owner however, awaiting an answer) nor on Sam's.

It sports 2 channels of PP 6AQ5's, 3x12AX7's and a 6CA4 rectifier.

Looks similar (even front plate) to 1404 integrated.

It was part of a console with TT and speakers (2x12" and 2 tweeters).

As usual for this brand it seems, weird connectors for inputs and speakers.

Thanks.

Patrice

DSCF2876.JPG


DSCF2877.JPG


DSCF2878.JPG


DSCF2880.JPG


DSCF2883.JPG
 
Last edited:
Register to hide this ad
What is it you want to know? Speaker connections? It would be easy to use those plugs without the individual switches. When you get it, post some pics of the underside. Just look underneith and see where the output transformers wires go to those plugs. It looks like it has the RCA input jacks on the left side (looking from the front).
 
Last edited:
Thanks, for the speakers plugs, I'll find a way to hook it up following the wires on the secondaries.

No, in fact, I'll need a schematic at least...

I was looking for the inputs and I'm glad you found where they are... Thanks.
 
Sam photofact and original papers from VM Enthusiasts ordered...

Now waiting for the "real thing" to come home...

Schematic is shared between 580, 581, 582 and 580-2... and maybe even 1404.
 
Last edited:
That's an interesting little VM integrated. Thanks for sharing. I'd expect that to sound pretty good with the 6AQ5 outputs. I hope the rebuild goes well.
 
Looks full of PEC's however... If I'm not too lazy, I could replace the components with discrete parts. It'll depend if it sounds good or not.

As for "Tone-O-Matic", I saw a lot of people disabling this loudness function.
 
Magic smoke...

Hello all,

After a couple of months waiting (been busy moving to a new apartment), I went to try it.

Tape outs of my Eico HF-81 going to the tape input, so far, so good, it was alive...

Gladly, as it needed a couple of shots of Deoxit (noisy pots), it was sitting on an old carpet to prevent stains on the carpet of the living room (i know, not a good place to work on those old things...).

In the meantime, I received a phone call and it lasted at least 20 min. Then, after that, time for a cigarette so I quit the apartment to go outside.

When entering again in the house, I heard a weird noise and thought at first that one of our cats was playing with his paws somewhere... until I saw the beautiful white smoke going out of the VoM amp!!! :smoke:

The first can cap was leaking some goo and obviously burning. Then, I realized that I forgot to shut off the amp.

So, quick shutdown and the smoky tube thing went outside on the porch where it took a few minutes for the smoke to completely dissipate...!

For safety, I removed the rectifier and started the amp again to verify if the power tranny was damaged in some way: all voltages and resistances were as per the schematic, phew!

Also, all tubes tested good, even the 6CA4.

No need to say that the old carpet had to go in the trash bin.

Obviously, time for a recap :)
 
Hello all,

After a couple of months waiting (been busy moving to a new apartment), I went to try it.

Tape outs of my Eico HF-81 going to the tape input, so far, so good, it was alive...

Gladly, as it needed a couple of shots of Deoxit (noisy pots), it was sitting on an old carpet to prevent stains on the carpet of the living room (i know, not a good place to work on those old things...).

In the meantime, I received a phone call and it lasted at least 20 min. Then, after that, time for a cigarette so I quit the apartment to go outside.

When entering again in the house, I heard a weird noise and thought at first that one of our cats was playing with his paws somewhere... until I saw the beautiful white smoke going out of the VoM amp!!! :smoke:

The first can cap was leaking some goo and obviously burning. Then, I realized that I forgot to shut off the amp.

So, quick shutdown and the smoky tube thing went outside on the porch where it took a few minutes for the smoke to completely dissipate...!

For safety, I removed the rectifier and started the amp again to verify if the power tranny was damaged in some way: all voltages and resistances were as per the schematic, phew!

Also, all tubes tested good, even the 6CA4.

No need to say that the old carpet had to go in the trash bin.

Obviously, time for a recap :)

Glad to here you didn't burn down your new apartment. I have the same amp that I pulled from a thrift shop VM model 581 that was missing its speakers. Same amp as the VM 1404. I took off the cardboard heat shield and put rubber feet on the bottom of the chassis in the screw holes provided. I still have the light wiring that plugs into the back of the chasis. I am still debating whether to drill a hole in the front wood piece and install a colored lens for the lightbulb to fit into. I have a ways to go yet in fixing it up. One channel is currently dead. I will have to continue work on it this summer.
 
Recap done... At least the power supply, I won't touch the ceramics for now.

I will investigate some recent posts to modify the loudness "tone-o-matic".
 
UPDATE:

The VoM sitting in my home studio. It was a cheap recap, meaning only PS filter cans replaced with singles underside (and you don't want to see the mess underside with electrical tape and all the sloppy soldering...:)). The ceramic couplers and almost all resistors were left in place. A custom wood base where it rests...

The little Wharfedales Denton are a good match for this one:

IMGP2212.jpg


IMGP2213.jpg


My son actively playing to some online game and a general view of "the studio". My girlfriend tells me there's too much stuff here... Sorry for the blurry pic!

IMGP2214.jpg


Patrice
 
Back
Top Bottom