• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

How LOUD do you listen to your speakers?

HTHMAN

Super Member
I was down in my listening room and the question came to me. So, I grabbed my SPL meter and took some readings at my listening distance. I turned on 4 pair of speakers and adjusted them to what I thought was pretty loud. It was at a level that I could listen, but not for an extended period of time. The reading was an average of about 90dB. I then turned them down to a level that was about as loud as I would want to listen for a prolonged time. I measured an average reading of about 86dB. At that level, depending on the speaker driven, I was usually pulling 1 to 5 wpc.

At what kind of levels do you listen and how much power does it take?
 
Register to hide this ad
I was down in my listening room and the question came to me. So, I grabbed my SPL meter and took some readings at my listening distance. I turned on 4 pair of speakers and adjusted them to what I thought was pretty loud. It was at a level that I could listen, but not for an extended period of time. The reading was an average of about 90dB. I then turned them down to a level that was about as loud as I would want to listen for a prolonged time. I measured an average reading of about 86dB. At that level, depending on the speaker driven, I was usually pulling 1 to 5 wpc.

At what kind of levels do you listen and how much power does it take?

I usually listen at 85db average or so, and I'll max out into the low 90s.
My amp puts out about 4 watts, so less than that. Probably about 1 watt (my speakers are rated at 98db and I listen about 3 meters away)
 
Using the SPL app on my Droid smart phone, I find I listen around 86 db with peaks up over 120.

What I find more interesting though is how quiet is the room without the system playing?
 
I bought an SPL meter for finding out if my ears may receive damage from uncontrolled loud and clean listening.
To my surprise everytime I wonder if it's too loud, I pick it and read like you 85-88, seldom 92-95, distance about 6-8 feet.
My B&Ws draw 10-20 Watts for this (Yamaha VUs).
Once I managed my 801s to clip a 430WPC Yamaha, it was not deafening, sadly I had not the SPL meter at this time yet and don't want to repeat this gear torture.
But nice to see beeing not alone with this interest.
 
have tested my 400 rms p.a in here with 15 inch drivers in cabs .from about 3 feet away i live in a bus . someone called round and wouldn't come in ..not surprised it was proper loud it was .. but generally when i aint blowing wharfedales up about i guess 2 or 3 watts from 2.5 feet
 
Hi,
me, 85 to 95 db according to the Parts Express mini digital meter.

Stan
 

Attachments

  • 001.jpg
    001.jpg
    64.9 KB · Views: 70
As I listen primarily to classical, the average is fairly low due to the dynamic nature of orchestral music. I'm sure that it's about 75 dBs normally, to allow for the necessary headroom.

Best Regards,
TerryO
 
None of these readings really tell us anything until we know what weighting was selected on each SPL meter.

je
Was gonna ask this too, as the Parts Express mini meter only has "A" weighting that starts rolling off below 1000 hz. This unit read's no bass, and is really more for field OSHA work, such as in plants. The reason for ignoring the bass, is because low frequencies really dont do any hearing damage. "C" weighting is neded to respond down to 20hz.
 
I don't know db levels but I don't feel I need to know specifics.
If playing back acoustic music I go by what those instruments might sound(natural loudness level) like in my listening space, for example ideally:)
Club and big venue live recording I go by feel as to where I might like to sit viewing a particular artist/group...not too loud or too soft.
 
Was gonna ask this too, as the Parts Express mini meter only has "A" weighting that starts rolling off below 1000 hz. This unit read's no bass, and is really more for field OSHA work, such as in plants. The reason for ignoring the bass, is because low frequencies really dont do any hearing damage. "C" weighting is neded to respond down to 20hz.
This is true (well, not really the hearing damage part - it is based on the inverse of the low-level Fletcher–Munson curve). We do need to know the weighting to share results with each other. On the other hand, I might argue that ignoring bass makes the most sense for this sort of discussion. If we use unweighted measurement, we are more comparing who listens to the most bass than who listens at the loudest level. I do realize that there are a lot of complexities to this. Probably suffice to say that, ideally, everyone would be able to take measurements with 3-4 weightings on a calibrated mic setup and then we'd really know how loud everyone listened.

P.S. 70-95dB, A-weighted.
 
I typically listen"c"weighted, 75-85db on average. Sometimes I'll push it to 95db but that is extreme for me. I did test it once and got my horns output up to 109db and quit it would go louder but why?
 
Depends on what I'm listening to. I try to estimate how loud it would be in real life and match it with my system

Folk/Acoustic- 75~83 dB
Classical- 78~88dB
Jazz- 85~92dB
Rock- Typically around 95~98 dB with peaks ~105. When the bass guitar thumps my chest like a live gig, it's loud enough.

*not actual measurements
 
Last edited:
What's that? Could you repeat that? Seriously, quite a bit lower than I used to.
Probably under 85db most of the time...with a few runs into the 90's when I want to feel the kickdrum in my chest.
Hibuck....
 
Back
Top Bottom