• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

My first SE 2A3 amp, impressions

diamondsouled

Recycle belly button lint!
Picked up a no name Chinese SE 2A3 amp for what it would cost me for parts here, free shipping from HK as well.

No name in the sense that it is usually sold under the Bowei name but for some reason these are sold with no make name only a model: SG-280 SE.

Wasn't sure if I should try it through my Sony APMs, they're rated 150 watts and this amp only puts out 6 watts per. Surprisingly this little amp drives them quite nicely. I may have to adjust the high and mid attenuators to match the amps tonal balance, no tone controls. Would be nice to be able to bi-pass the pre in this so I can try a few different pres with it.

The Chinese tubes that came with it sound quite good, was a bit surprised at that. Will have to eventually track down some better 2A3s :yes:

Think I will end up trying this amp through my Altec Valencia/JBL Baby Cheek set up.

Haven't opened it up to see what the wiring and components look like. Might eventually throw a few hi quality caps in there.

attachment.php
 

Attachments

  • SE 2A3 amp.jpg
    SE 2A3 amp.jpg
    103 KB · Views: 1,301
  • SE 2A3 amp #2.jpg
    SE 2A3 amp #2.jpg
    17.1 KB · Views: 598
Last edited:
Register to hide this ad
Paid $469., do a search for: SV 2A3 Class A. Took quite a while to get here but since the shipping was free. It was packed well. I suspect that the components are fairly basic but I have some nice PIOs for couplers and some nice polys for after the rectifier. :yes:
 
Last edited:
Man, that's a nice lookin piece of kit dude. I'd like to see an upskirt shot too, I bet you a buck it's got Wima caps in it, which really don't require upgrading IMHO. If you do end up with some vintage 2A3s in it, I'd be careful to check the voltage and current draw. Many of these modern 2A3s can take a bit more heat than the vintage ones, and if they are saying 6 watts per side, they must have them cookin pretty good. The plain Jane Sovtek is a fabulous tube that will indeed take the extra juice. The more I use Sovteks the less I feel the need to hoard USA variants. Congrats on entering the wonderful world of the 2A3. :thmbsp:
 
Man, that's a nice lookin piece of kit dude. I'd like to see an upskirt shot too, I bet you a buck it's got Wima caps in it, which really don't require upgrading IMHO. If you do end up with some vintage 2A3s in it, I'd be careful to check the voltage and current draw. Many of these modern 2A3s can take a bit more heat than the vintage ones, and if they are saying 6 watts per side, they must have them cookin pretty good. The plain Jane Sovtek is a fabulous tube that will indeed take the extra juice. The more I use Sovteks the less I feel the need to hoard USA variants. Congrats on entering the wonderful world of the 2A3. :thmbsp:

Thanks Jay. I always wondered if power would be an issue with a SE 2A3 amp. Not sure if it's because I'm listening at lower volume levels than I used to but this amp has lots of get up and go.

Will take some upskirt shots this week. :yes:

Wimas are quite fine caps for sure. I have a few pairs of Mundorf silver oilers around and would like to give them a shot. Hope it's point to point, that would sure simplify things.

BTW they come in black as well, I do like the red/burgandy though. You have to ask for the 110V version.
 
Last edited:
I think they're dreaming.:yes:

jeff

Optimistic for sure. :D

Actually the power is not mentioned in the ad I responded to. Here's the specs to the Bowei version:

110 V - 240V AVAILABLE
Power: 6watts x 2 (Class A Single Ended circuit design)
Input/Driver tube: 6H8Cx2
Output Tube: 2A3C x2
Rectifier Tube: 5Z3P x1
Hi END Outstanding Signal/Noise Ratio:90dB
Distortion: less than 1% at full power
Sensitivity: 200mv
Input Consumption: 200W
Weight:18kg
Size Dimensions:390 X 320 X 190mm
 
Last edited:
Here's a Google translation of the original Chinese description. What a hoot to read:

Bravery machine common sense is introduced:

Bravery machine (tube amplifiers) : it is sound in the field most ancient and enduring, the evergreen has the advantage of sweet voice is soft, natural concern, especially the dynamic range, linear, is not other devices can light meaning instead.

The transistor produce because of its small volume, and power saving soon replaced vacuum tubes, the development of technology and lead to vacuum tubes to decline, from prosperity is to have greatly "helpless" flower falls to the feeling, but because the recent years people to the improvement of acoustic technology found that produces a transistor amplifier tubes can match tone, so today tubes in the audio and rapid rise to the field.

Due to the vacuum tube is the voltage control amplification device, its distortion composition are accidentally time most of the music performance in distortion, the process is just times frequency harmonics, so that is measured with instrument harmonic distortion larger (usually in a more than 2%), sounds are not only not curt harsh distortion feeling, but is instead a gentle yellow roses thick and sweet greasy moving lasting appeal, particularly suitable for playing a slow elegant classical idyllic poems and Chinese folk songs. Especially in performance (such as "high mountain running water), the fishing boat had", "HuJia sing late 18 take", "the wild goose" guzheng pingsha fall the guqin empty spirit, fully, full, elegant, have a transcendent, QianChenBuRan, even beautiful to the otherworldly and return to the feeling.

Along with the progress of modern science and technology, the electric tubes (especially some brand such as vacuum tube factory changsha dawn, Beijing, PHILIPS and the former Soviet republics of production quality is the life of the tube) to extend several times, more make tired of cold hard, dry digital's older generation of fans to vacuum tubes that sense was gentle and sweet memory. Plus many manufacturers exploit, fire and finally make this for more than half a century of life he will become energetic 50's ability to revive the old man of the intended!!!!!
 
2A3 SET - 6wpc? Don't think so.

Nice looking amp and seems to be great value - having built a few SETs I know I couldn't do it for that price. Not sure what your speakers are but if Altec drivers are involved, I bet you are going to like this.
 
I got one of Bricktop's builds and he says hey measured 5WPC and I got to believe it.
Sounds like more then that to me but I am using some vintage speakers in a home brew cabinet with moderen caps.
 
About the 2A3 tubes - I've had Sylvania, Sovtek, Shuguang 2A3C and JJ 2A3-40. Very amp and system dependent, but that's about the order I would list them in (Sylvania not great, 2A3-40 best). The JJs are very robust and should last a long time.

About the OPTs - I went from James 6112s to some much bigger Electraprint OPTs and the difference was pretty significant for the better. My guess is that if they cut a corner or two it's probably in the iron. If it's a pretty good amp and a good match with your speakers (I think it will be, I run Altec 416s with mine) it may be on your short list of upgrades to do. And replacing the OPTs is pretty simple. But I get the feeling I'm not telling you anything you don't already know.
 
Back
Top Bottom