• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

blown fuses

  1. 6

    LUXMAN R-1070 (3 fuses blown and faint sound if relay clicks)

    New-to-Me R-1070. This single owner unit is stuck in Protection Blinking mode with the top 3 fuses burnt. Now I tried replacing all 3 but it still happened, but randomly the Relay would Click and there would be sound; Furthermore the R-CH was faint, and when the volume went too high it went...
    • 68BStang
    • Thread
    • blown fuses luxman protection mode r-1070 receiver
    • Replies: 6
    • Forum: Solid State
  2. PE Williams

    Coil rub, blown fuses on Sherwood/HK setup

    Hi all, been searching threads the past couple of days to try to solve my issues, but figured I'd just post my situation as nothing I've found quite matches my setup. Receiver: Sherwood S-7225—has both a single power fuse and two speaker fuses, one for L (front and back) and one for R (f+b)...
  3. P

    Harman Kardon 330C blowing fuses

    My 330C worked well and one day developed some distortion in the right channel. In a short time the channel stopped working and no sound in the right speaker. I took a look inside ad spotted a suspect cap, C405 on the main board which tested out of spec. I replaced the cap and still no sound on...
    • pcrosewood
    • Thread
    • blown fuses harman kardon 330c right channel not working
    • Replies: 125
    • Forum: Solid State
Back
Top Bottom