low pass

I have a 2.0 PC speaker system which works fine but I'd like to increase the bass on it. I also have another 2.0 PC speaker system which doesn't work anymore when plugged into the mains, but it's still possible to use the secondary speaker if you connect it directly to a phone or a laptop...

I designed an input board for the Soundcraftsmen PCR800, PM840/860, and similar amps. It will also work on the A5002 or most amps in general with the correct power source. It uses the built in +/- 15V supply in the PCR style amps. It provides a buffer for the input to the amp and will accept...

I am thinking about changing a pair of speakers by eliminating bi-amp and adding a low pass filter looking for thoughts: Have a pair of tower speakers (carver) which were originally designed to have freq input above 100 hz ( 4 ohm)to the first set of binding post and freq 100 and below (4 ohm)...

Greetings all, Seeking consensus regarding using a high pass or full range for my subwoofer. Two different techs at the subwoofer manufacturer garnered two different responses. McIntosh rep says high pass. Seems to me on a "common sense" level that filtering all that signal through the sub ...

This isn't cross posting! I just have a more specific question now.... I have some Showco S200 "Pyramid" studio monitor/speakers that I'm rebuilding and upgrading the wiring and crossovers. The crossover points are 200Hz , 800 Hz and 5kHz. Before ordering some ClarityCaps from Parts...