• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

pl570

  1. D

    PWG-011 Board Needed

    Looking for either a PWG-011 or PWG-017-0 for my Pioneer PL-570 direct drive turntable. Mine has the PWG-017-0 board in it and has a bas PD1001 IC chip. If anyone has one or any leads please let me know. I look on ebay almost daily with no luck. Thanks in advance!
    • dskansas
    • Thread
    • pd1011 pioneer pl-570 pl570 ps1011a pwx011 runaway speed issue
    • Replies: 1
    • Forum: Turntables
  2. Old Guy8

    Should I exchange Cartridges between my tables, for better compliance matching?

    AT440mlb on Linn LP12 with Basik LVX arm. Grado Gold2 or ME+ mono (identical Ortofon SH4 headshells) on Pioneer PL570. Shure M95 LPGear Vivid Line on Lab 400. Grado M+ (silver equivalent) on Denon DP37F. So my question is: Can I do a better job of matching the above carts and...
    • Old Guy8
    • Thread
    • at440mlb denon dp37f grado gold2 grado m+ lab 400 linn basik lvx linn lp12 pl570 shure m95
    • Replies: 17
    • Forum: Turntables
  3. Old Guy8

    Pioneer- PL570. Rotation rub fixed. Now Antiskate not working.

    I have a noise when platter rotates. Taken apart I don't find any evidence of interferance rubbing. The spindle and bronze bushing does not show much wear. A 5mm bearing ball rides in ground center at bottom of spindle. It sits against nylon thrust plate. Plate has groove for seal. The thrust...
    • Old Guy8
    • Thread
    • pioneer pl570 pl570 pl570 bearing pl570 bearing noise pl570 noise pl570 rotation rub pl570 spindle bottom cover
    • Replies: 34
    • Forum: Turntables
  4. Old Guy8

    Pioneer PL570 Bearing noise? How to Access?

    Fourth edit: Rubbing rotation noise was solved by polishing bottom thrust plate to remove .003" concave dimple from bearing ball. That raised spindle, likely bach to original position. Added oil to spindle bearing. I posted another thread showing process. THIRD EDIT: Think oil lube not so good...
    • Old Guy8
    • Thread
    • pioneer pl570 lubrication pl570 pl570 lube pl570 noise pl570 noisey bearing pl570 repair
    • Replies: 37
    • Forum: Turntables
Back
Top Bottom