230V Avid Volvere turntable for U.S. use with 110V power supply?

[cicada_17]

Hi, first post, am in need of advice regarding an overseas turntable. I have the opportunity to bring back a U.K. spec Avid Volvere turntable. My question is, can I simply purchase an Avid power supply that takes 110V/60hz U.S. voltage to power the turntable motor? Or would the motor be wired specifically to accept the 230V/50hz power?

Very much appreciated for any input.

 

[sqlsavior]

Check with Avid about the suitability of their power supplies for your turntable in the USA. If the motor is NOT AC synchronous, a step-up transformer for 115v to 230v or 110v to 220v should work, but I'd still check with Avid. Maybe it's as simple as flipping a switch or changing a jumper.

 

[Beobloke]

I suspect it will be absolutely fine but, as above, contact Avid - they're a very helpful bunch.

 

[WaynerN]

If its a synchronous motor, there will be a speed problem as synchronous motors lock onto line frequency. You may need a different pulley to get the proper speed. You need to check into this before you go further.