• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Janszen Model 65 electrostatic Speakers (questions)

M

Mcenroe7

Active Member
Good morning all..I just obtained these and would like to test them and then try them with my pair of AR 3a’s. From what I have read, these are solely tweeter speakers to be used as a “add on” to certain models. I have no experience with these and am unsure not only on how to test, but also as far as “set-up”..as far as hooking them up with another pair of speakers? Any help/advice on this would be greatly appreciated!
Thanks
 

Attachments

  • EB00CD43-371D-4F78-9D36-127559546BAA.jpeg
    EB00CD43-371D-4F78-9D36-127559546BAA.jpeg
    46.9 KB · Views: 33
  • E5780BE9-4EC8-4915-A962-1780A56816D7.jpeg
    E5780BE9-4EC8-4915-A962-1780A56816D7.jpeg
    57.6 KB · Views: 29
Register to hide this ad
I have a pair of similar Model 41 Janszens. I replaced the selenium rectifier with four silicon diodes in series and also replaced the .0047uF capacitor. I run mine with large Advent cabinets using a jumper from the Advent terminals to the Janszen modules. The built in crossover probably rolls off at about 1000 hz. I have some specs and schematics if that will help.
 
sfox52 said:
I have a pair of similar Model 41 Janszens. I replaced the selenium rectifier with four silicon diodes in series and also replaced the .0047uF capacitor. I run mine with large Advent cabinets using a jumper from the Advent terminals to the Janszen modules. The built in crossover probably rolls off at about 1000 hz. I have some specs and schematics if that will help.
Click to expand...

Thanks sfox..I'm going to tinker with these this weekend..again, much appreciated..
 
You must log in or register to reply here.
Back
Top Bottom