Kenwood 4070 bulbs and fuses

Ninjy

Ninjy

New Member
I am about to receive a KR-4070 that I want to replace all bulbs & fuses in. What bulbs (type, volts,etc.) will I need to replace all internal bulbs. Also, what fuses will I need to do the same with the fuses. I am planning on getting these while I'm at the electronics store so I'll already have them when I receive the unit. Thanks.
 
Register to hide this ad
Contact member dgwojo, he is the go to guy for bulbs around here.

I think there is a recent bulb thread that has his email address.

Fuses you can get at Radio Shack. Replacing good fuses will offer no additional reliability as fuses don't heat cycle like bulbs do.
 
You can save yourself some time by downloading the manuals, free, for your specific model Kenwood receiver from....www.hifiengine.com.

The parts list the exact voltage and current ratings for all the bulbs/lamps and fuses.

Oh by the way, fellow AK'er wmgwizard is right about fellow AK'er dgwojo he "IS" the go to guy for what you need, quick, fast and excellent service, very helpful even has his own website just do a Google search on dgwojo.
 
Thanks to you both. I have access to all the bulbs and fuses I've ever needed, I just needed to know which ones to pick up. Thanks for the link. I've already looked there but I'll look again, maybe I overlooked it.
 
It's there, Kenwood KR-4070 receiver (as you said you may have overlooked it?) the reason why I know it's there is because I've already seen it myself.
Once you find it and open it scroll to the "parts list" on pages #13 and #15 for specifics. If for whatever reason you still can't find it in the parts listing scroll down to the very bottom and view the schematic, it also list the values on bulbs/lamps and fuses.
 
You need two pilot lamps (fuse type) 8V300mA or 250mA for the scale. Meter: pilot lamp 8V300mA, Stereo is 8V50mA.

If there is no defective fuse, you don't need any.
 
Thank you for the details on the lamps. Also, I did in fact look over it; it was listed near the bottom on the parts list. Thanks to everyone that responded. This forum is the best!
 
By the way is that you, pictured, in your avatar?! :scratch2:

LOL!....I sure hope not fella! :D
 
You must log in or register to reply here.
Back
Top Bottom