Kenwood Basic C2 BOM

[Phaceless56]

Can I get some help with a BOM for the Basic C2 I want to restore it I fixed the balance Pot and the sound has improved now I want to do the rest I plan on keeping this Pre once I do this I will restore the Basic M2a

Thanks in advance I hope I'm doing this right

 

[ajfink]

Here's at least a partial list: https://audiokarma.org/forums/index.php?threads/kenwood-basic-c2-recap-bom.879800/#post-13037695

 

[Phaceless56]

I have those a full list would be great at this point I'm surprised a complete BOM is not out there or if it is I have not found it Thank You ajfink

 

[Rakz]

I have those a full list would be great at this point I'm surprised a complete BOM is not out there or if it is I have not found it Thank You ajfink

Have you even checked the list in my thread before whining about that it does not exist?

I had the same issue but decided to give back to the forum by creating this BOM.

This list is more than enough for a full recap of all electrolytic caps and all ceramics as well as sockets for op-amps, zeners for 16v ops etc. I would say that after the recap I consider it overkill since I didnt bother with a lot of the ceramics cause they werent in the signal path.

If you check the attached jpgs you can even see positions which maps against the service manual. All electrolytes also maintain correct raster size. Best of all, the BOM can be imported to mouser import tool.