Magnavox 6v6 Stereo

[BlackSwamp]

Magnavox 6v6 Stereo - P/P bass, SET treble

I just pulled this amp from a Magnavox console and could use some help in identifying it and locating a schematic.

It's Stereo with (2) 5U4's, (2) 12AT7's, a 12AX7 & (6) 6V6's.

The only chassis stamp codes I see are:

246033

810200 (the first zero is poorly stamped so it might be something else.

I have a picture of it here

Looks interesting, the console and preamp are obviously well built. A 15" and horn on both sides of the console but no crossover as at first look it appears that function is inside this amp.

 

[Tom Bavis]

It's AMP810200, found in Sams #563 - I don't remember if I have it - I'll look when I get home.

Biamped, with the crossover in the metal box. Push-pull bass output, SE for treble.

 

[BlackSwamp]

It's AMP810200, found in Sams #563 - I don't remember if I have it - I'll look when I get home.

Biamped, with the crossover in the metal box. Push-pull bass output, SE for treble.

Thanks Tom!

That's a very interesting set-up. I'll be very interested in taking a look at the schematic as well as getting to a point where I can power it up.

 

[Tom Bavis]

OK, I have a schematic for "81 Series" from Sams, and it says similar to AMP182, which I also have. I DON'T have the folder that covers it, 563-10.

email for a scan of the schematic - tbavis(at)rochester(dot)rr(dot)com