• Please note that there are a few updates and clarifications made in the Audiokarma Rules, mostly relating to advertising and the addition of the new "Paying it Forward" & "Giving back" forums in the AudioKarma Audio Marketplace section.

MC275 and KT tube family question...

W

wdomeka

New Member
I've read where the KT88, KT90 and KT100 tubes are considered "interchangeable".

Would this be true of their use in a new MC275 or is the MC275 limited to the 88's?

What about the new KT120's. Can they be used in a new MC275?


As always, thanks for your replies.


Cheers,


Bill
 
Register to hide this ad
The answers, Bill, are in past threads here at AK. Personally, I'd suggest you keep closer to the KT-88/6550s where possible.

The KT-120s, however, are going to be pushing the filament current limits of the power supply and I'd not suggest that route for this reason.

Cheers,

David
 
Ron-C has stated that one should not run the KT-90/120 in the MC275. Designed for and should be run only with KT-88/6550 power tubes.
 
You must log in or register to reply here.
Back
Top Bottom