Karl vd Berg
Super Member
Good morning/evening,
I have a question regarding the "sensitivity" of Mic mixing in this amp. We were using a mic and it was pretty loud already at level 1, giving a very low safe margin in this case.
The mic circuit goes directly to the power amp, bypassing the amp's main Volume, so that Mic little level pot is the only limiter to a possible disaster.
Now, since I don't want to look around for another 50k pot which I guess "would not" easily fit here, I was wondering if I could replace R10 (right after level pot) with a higher value, like 2.2k or something like that.
Any other suggestion much appreciated.
I have a question regarding the "sensitivity" of Mic mixing in this amp. We were using a mic and it was pretty loud already at level 1, giving a very low safe margin in this case.
The mic circuit goes directly to the power amp, bypassing the amp's main Volume, so that Mic little level pot is the only limiter to a possible disaster.
Now, since I don't want to look around for another 50k pot which I guess "would not" easily fit here, I was wondering if I could replace R10 (right after level pot) with a higher value, like 2.2k or something like that.
Any other suggestion much appreciated.
