• Please note that there are a few updates and clarifications made in the Audiokarma Rules, mostly relating to advertising and the addition of the new "Paying it Forward" & "Giving back" forums in the AudioKarma Audio Marketplace section.

Pics of your turntable set up

DSC_6678.jpg

This is my Thorens TD124. SN 13943 Minus paint (cuz I like it that way)
Plinth is in Pennsylvania slate. Two 2-inch thick slabs stacked one over the other.
Tonearm is the Graham 2.2
Cartridge is the Denon DL-103R in one of Uwe's ebony bodies. At this time I'm using the standard tubular cantilever and conical diamond tip.
The acrylic dustcover is from Ferruccio in Switzerland.

DSC_6688.jpg

another photo from the side.
Today is December 30, 2017. Merry Christmas and a Happy New Year.
-Steve
http://www.theanalogdept.com
 
Habs kinda' suck the big one this year (I'm allowed to say this, been a fan since '65), but it is what it is.
Hey your right,I think its time for a rebuild .Been watching the habs since the 60's ,had some really good years,but lately not so good.
 
Beauty!

BTW, your arm looks primo. How are you liking it?

I like it just fine :). I was lucky to find an original Thorens NOS arm board and AKer Totem came by and guided me through the installation. I find the arm is a little bouncy when I'm lowering it but all in all I'm impressed with the build quality. Now that the cartridge has broken in I'm thrilled with the clarity of the sound.
I'm currently looking for a phono pre with a little more gain as my Nova II will do 60 dB but that's a little shy of optimum for the Dynavector. I have a Dual CS 5000 that I bought a few years back still sealed and I'll set up two tables and use the Nova II for the Dual.

Happy New Year!
 
Back
Top Bottom