I recently was given a Pioneer receiver SX-6, tape deck CT-8R, reverberation amplifier SR-303, dynamic processor RG-2, and timer DT-510 with no instructions on how to connect them. I am 27 and have never owned or attempted to connect a system like this. I have an onkyo receiver to which I have my tv, playstation 3, wii, and computer connected to. The tape deck, reverberation amplifier, and processor connection was foreign, but I seem to have the sound going through the processor and reverberation amplifier when I use the tuner. The issue is when I plug my ipod into the receiver through the auxiliary port. The signal does not appear to be going to the reverberation amplifier and the processor, though the music still plays through the speakers. I am not sure if I have connected the components correctly, and that an auxiliary device just won't go through the reverberation amplifier and the processor, or if I connected them improperly. Either way, if there is any way to have the ipod music signal pass through both the processor and reverberation amplifier it would be nice. If not, oh well...
Pioneer System Set-Up Issues
- Thread starter lstone84
- Start date
Register to hide this ad
dnpainting
Super Member
You can download the manuals here:
http://www.kallhovde.com/pioneer/Pioneer/Main scan page.html
Don't know if you have pre amp out/ power amp in or tape monitor, so what ever you have, just substitute one or the other.
I would go, Receiver Pre-Amp out to RG-2 in, RG-2 out to SR-303 in, SR-303 out to Power Amp In. Then connect your tape deck to the SR-303 ((Deck) Rec to SR-303 Tape Out and (Deck) Play to SR-303 Tape In.
On the timer DT-510, Plug the timer directly into wall outlet, Plug the Stereo Receiver into a plug on back of DT-510, then, connect your tape deck plug into the Stereo Receiver's switched outlet.
This is the way I have things connected on mine except connected to Tape Monitor switch. Hope This Helps! And Welcome To AK!
If I missed something or said something wrong, please chime in and correct.
http://www.kallhovde.com/pioneer/Pioneer/Main scan page.html
Don't know if you have pre amp out/ power amp in or tape monitor, so what ever you have, just substitute one or the other.
I would go, Receiver Pre-Amp out to RG-2 in, RG-2 out to SR-303 in, SR-303 out to Power Amp In. Then connect your tape deck to the SR-303 ((Deck) Rec to SR-303 Tape Out and (Deck) Play to SR-303 Tape In.
On the timer DT-510, Plug the timer directly into wall outlet, Plug the Stereo Receiver into a plug on back of DT-510, then, connect your tape deck plug into the Stereo Receiver's switched outlet.
This is the way I have things connected on mine except connected to Tape Monitor switch. Hope This Helps! And Welcome To AK!
If I missed something or said something wrong, please chime in and correct.
Last edited: