ex250
New Member
Solved the problems with the PSU, now sistem works OK, remember to check mini fuses and zeners in that system first of all.
Now there is a problem with the CD, won't spin. In test mode the same, the laser seems to work.
Any body knows if the lack of focus prevent this system to spin the cd drive and the tracking movement also in service mode?
The spindle motor not receives any power, the smal position switch works on/off
Now there is a problem with the CD, won't spin. In test mode the same, the laser seems to work.
Any body knows if the lack of focus prevent this system to spin the cd drive and the tracking movement also in service mode?
The spindle motor not receives any power, the smal position switch works on/off