• Please note that there are a few updates and clarifications made in the Audiokarma Rules, mostly relating to advertising and the addition of the new "Paying it Forward" & "Giving back" forums in the AudioKarma Audio Marketplace section.

Sansui 4000 Receiver F-1220 board HELP!

jpreza

jpreza

Active Member
I'm currently drawing high current through my Sansui 4000 receiver after recapping F-1176 and F-1187 boards. That said, I also have a loose wire coming out of the AM board F-1083. This blue/yellow wire appears to connect to the back of the AM Meter Block board F-1220. Could someone take a picture of the back of this board to see where the cable connects?

Thanks in advance....JP
 
Register to hide this ad
I no longer have a 4000, just pics and what's on the internet. I have a 5000X now.

If there was a wire attached there, you should be able to see signs of it on your board.
 
That was it! The DBT is good for now. I'm continuing my thread on the previous one as I still have the FM out and now the Right channel is out also:

Sansui 4000 Receiver MORE HELP NEEDED!

In my infinite wisdom in trying to find the FM issue with my Sansui 4000 receiver, my DBT lights up like a Christmas tree. I was working on the F-1187 ripple board - I replaced the four existing capacitors with new Nichicoms of same uF and either same/higher voltage rating. I had to disconnect...
audiokarma.org
 
You must log in or register to reply here.
Back
Top Bottom