• Please note that there are a few updates and clarifications made in the Audiokarma Rules, mostly relating to advertising and the addition of the new "Paying it Forward" & "Giving back" forums in the AudioKarma Audio Marketplace section.

sansui g-5000 f-2856 driver board part verification

P

peter101

Member
Im trying to verify the correct part vr06 from the right channel. The value on the part vr05 from the left channel itself is 220 ohm. However the schematic from the service manual is 100 ohm. Which is correct? Assuming its 220, can I use a 200 ohm?
 
Last edited:
Register to hide this ad
You must log in or register to reply here.
Back
Top Bottom