Toshiba SA-735 receiver only works in mono

CavScout

Super Member
I dusted off an old Toshiba SA-735 today and cleaned the pots and switches.

It sounds great but I noticed that it is only working in MONO.

When I switch it to stereo the sound only comes out of one side.

Does anyone know the likely culprit for this kind of problem ?
 
Register to hide this ad
Make sure to really clean the pot well sometimes it takes some elbow grease. If not that I suspect an issue in the pre amp section.
 
I dusted off an old Toshiba SA-735 today and cleaned the pots and switches.

It sounds great but I noticed that it is only working in MONO.

When I switch it to stereo the sound only comes out of one side.

Does anyone know the likely culprit for this kind of problem ?
Disassemble and clean the MONO/STEREO switch.
 
I thought this was a nice receiver and worth the time getting it work. Clean the mono/stereo switch.

I think I had to clean all the switches to get mine working.
 
Last edited:
I don't think it is the mono/stereo switch, I would more suspect the mode and/or tape monitor switch. Clean 'em all.
 
Back
Top Bottom