Ron Pilgrim
Well, whadya say, Pilgrim
I have been rebuilding these old JVC system speakers(good cabinets) with Koss tweeters and x-over components.(re-using the JVC bass drivers) The first one was turned out quite good and on first impression sounds pretty good. The second one looks ok, but no sound. Testing the x-over shows no continuity on the positive side. The positive feeds into what appears to be some sort of switch with Culver 085A-50 inscribed on it. Has continuity to the input, nothing at the output. I believe I have another x-over that I can use, but should I replace whatever the faulty part is first?
