• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Recent content by ioweegian

  1. I

    Marantz 1060

    Hi all, Hoping to get some help on my Marantz 1060 recap. I'm a total noob and probably should not have jumped in headfirst and whole hog, but I did. I recapped most of the unit using the guidance on this forum. I was able to set the bias on R730 and DC offset on J716, however R729 and R724...
  2. I

    Marantz 1060

    Hi all, Hoping to get some help on my Marantz 1060 recap. I'm a total noob and probably should not have jumped in headfirst and whole hog, but I did. I recapped most of the unit using the guidance on this forum. I was able to set the bias on R730 and DC offset on J716, however R729 and R724 do...
  3. I

    Do you know what multi-turn pots should be used to replace the ones on the 1060? I see the...

    Do you know what multi-turn pots should be used to replace the ones on the 1060? I see the service manual shows two at 100K ohms and the other two at 470K ohms.
  4. I

    Thanks for your help! One more newbie question: Looking at the schematic and comparing it to...

    Thanks for your help! One more newbie question: Looking at the schematic and comparing it to what others have done, it looks like many are using higher voltage and higher capacitance film caps than are in the service manual. For instance using .01 uf 50V film caps on C911-C912 instead of 47pF...
  5. I

    I'm a noob myself and am also recapping a 1060. Your photos are actually incredibly helpful...

    I'm a noob myself and am also recapping a 1060. Your photos are actually incredibly helpful since I put the project down for the last year and am now returning. I was hoping you might be able to provide some guidance on which film caps you used. Are they all the same?
  6. I

    On your 1060 recap, I'm just curious what adding the three Vishay/Sprague 1uf 100V coupling caps...

    On your 1060 recap, I'm just curious what adding the three Vishay/Sprague 1uf 100V coupling caps on the output caps and the filter does exactly. Does lead to significant improvements in the sound? I'm not sure if I want to venture to do that. This is my first recap project. I'd appreciate any...
  7. I

    Hi, I am currently recapping a Marantz 1060. Your post has been immensely helpful. I am curious...

    Hi, I am currently recapping a Marantz 1060. Your post has been immensely helpful. I am curious if you recall which film caps you were using. Those small red ones. I think those replaced the ones that say 474M 50V. I am not sure what I should be purchasing. If you can point me in the right...
  8. I

    Marantz 1060 Restoration Project

    100V Mylar Caps I'm unable to find 50v .22uf Vishay/Sprague Mylar caps on Mouser. Can I use 100V .22uf Mylar caps? http://www.mouser.com/Passive-Components/Capacitors/Film-Capacitors/Polyester-Film-Capacitors/_/N-5g7w?P=1z0wqu1Z1z0vkuw&Keyword=Vishay+225P+22uf&FS=True
See more
Back
Top Bottom