• Please note that Audiokarma will be offline briefly for updates early on Monday morning, September 28th.
leesonic

leesonic

Subscriber
Captured on security camera... 57 From Southern NJ
Joined
Last seen
Messages
7,915
Media
1
Reaction score
7,651
Points
113

Profile posts Latest activity Postings Media About

  • jonm
    Hi Lee, I have a NAD 3020 that looks mint, but is rough inside. You worked on my 1020 years ago and it's still going strong! Do you still restore equipment? Thanks, Jon up in Maine
    R
    Does anyone know where I can buy the 10kuF 80v, 10kuF 120v, & 330uF 50v power supply caps for my (5) NAD 2200 power amps? Apparently, they are no longer made by Rubycon nor Nichicon.
    D
    I love NAD's since my first buy in 1980. I have fixed too many to count without service manuals. However I have a 2400 Power Envelope and the Monitor service manual does not have the same circuits and parts list. I am hoping I might get my hands on one from you, since your a NAD kinda guy. Any help would be appreciated and compensated. Calgary AB Canada
    Darwin
    B
    Hello Lee I have some NAD equipment that is functioning but would like to have it refurbished. Are you still doing work on NAD gear? I am in south Jersey as well Thanks
    G
    Hi Lee,
    I want to talk to you about what I need done with my Marantz 2270 receiver. It works fine but probably needs to be recapped. etc
    Thanks,
    Jeff
    Dony
    Hello Lee, I saw on one of the threads your post about owning a 7140 and the how the tuner is a excellent feature in the unit. I currently own a 7140 that has a faulty tuner. Should i try to get it repaired, is it worth it? Your thoughts are appreciated.

    Regards,

    Don
    D
    darwinwandle
    I have a 7000 if parts cross over I don't need or intend on fixing due to time.
    jonm
    Hi Lee, you restored/refurbished my NAD 1020 a few years ago. I'm now looking for an NAD power amp to mate with it, whahat do you suggest, and do you have any restored ones available? Thanks, Jon in Maine.
    S
    Hello, I am doing a service job on my brothers NAD7220PE receiver which have a "welcome hum". I have tested some capacitors and they measures all within specs. Instead of shotgun replacement of all capacitors, which I have I tried with various success before, I would rather implement Your delay circuit solution. Do You have any for "export" to Norway? Either unpopulated PCB or complete. Regards Svein
    V
    vijverwcl
    You're sure C516/517/520/521 aren't bad or shrunken due to heat issue, I just did a job and "hum" issue solved.
    Racso2099
    hello @leesonic . I´ve reading a lot about your restorations for the nad3020. recently i adquired one here in my town (mexico city) and i would like to know how i start to restore this piece of art. blessings
    Piertro
    Wow. Amazing faceplates by Leesonic made to replace existing. Where can I find these? Can I find these? Are they just privately done or for sale to fans too?
    leesonic
    leesonic
    I just make these for amps that I restore. They aren't really easy to fit.
    Piertro
    After a time searching I finally found a beautiful sounding NAD 3020. And at a good price. It had non-original knobs, but managed to find some in Czech Republic! Sadly the faceplate has a corner broken off. Any ideas on locating a replacement faceplate?
    M
    hey I was wondering if you could PM me when you get a chance. Had a few questions about a recap. thanks!
    gunpoet
    Hi Lee! Hope you're well! Do you happen to have four Advent prodigy woofers? Working on a project and you came to mind! If you do, I'm ready to pop on them. Thank you!
    P
    Hi Lee
    I think I might be sending you emails that aren't getting through to you on a previous thread. apologies in advance should there be redundancy.
    Following up on our previous discussion, I wanna ship my NAD 3020 to you for a full restoration, recap etc, just need your shipping address and any other info. Thanks!
    -Yanik
    rhodus
    Happy New Year!
    I purchased an SX626 from you a while back and it is awesome. I was wondering if you would be interested in doing a full resto on a Pioneer SA900 for me. I have an unmolested original that just quit working and I have 2 parts units.
    Z
    Hi Lee,

    I have an original 3020 in working condition, but with almost entirely original components. Do you still work your magic on these with re-capping and testing components?

    Thanks,
    Jon
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom