• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html
dgwojo

dgwojo

Subscriber
AK Subscriber From SouthEast Michigan
Joined
Last seen
Messages
4,927
Media
21
Reaction score
112
Points
63

Profile posts Latest activity Postings Media About

  • Cdemeo1
    Hi Dave.

    Any chance you can source some incandescent bulbs for my Kenwood 700M? Would love to have two sets for backup. Thank you!

    Christopher
    S
    Hi Dave,
    Hope you are still sending out lights, etc. I'm looking to relamp my Marantz 2285B with incandescents. I also need a dial pointer light. Can you let me know what this runs and shipping dets.
    Thanks,
    Steve
    F
    Hi Dave. Restoring a Sansui 5500. My original fuse lamps measure 23.1mm overall. Looking for warm white LED replacements. Do you have the correct lamps or know the proper replacement? I found an eBay kit but wanted your opinion before ordering. Thanks, Paul @ PHD Vintage Audio Services
    P
    Hi Dave wondering how easy it is to acquire and replace the function lights on my Pioneer SXD 5000? (The green ones).

    Paul in British Columbia
    E
    Hi Dave,
    Richard at AntiqueRadios recommended you to replace the lamp on my Realistic STA-240 receiver. The burned out bulb is hard wired/soldered and mounted on a small board with designation ISOSAKI 7186. The voltage across its leads with the power on is 7.1 or 7.2 V AC. Do you have an replacement bulb for this receiver, or know where to get one?
    Should I replace it with an incandescent bulb or LED?
    Thanks, Emil
    E
    emottola
    The LED will last longer but apparently needs a 1K ohm resistor as well to not burn out instantly. Maybe safer just to go with the incandescent bulb that is guaranteed to work with the circuit in this radio? (The original bulb lasted 46 years!)
    G
    Good evening, I was referred to you by ChatGPT. I’m looking for warm white light kit for pioneer sx-680 and sx-750. If you don’t have can you lead me in the direction to find these?
    P
    Realistic SCT-18 (14-606) VU meter backlight bulb:
    Hi Dave,
    Sorry to see you winding down operations. I hope I'm not too late. I'm looking for replacement bulbs for the Realistic Cassette deck (SCT-18). Do you have or can you point me in the right direction? Let me know!
    Thank-you!
    Patrick
    rkbor
    Hi. New here. Repairing a Kenwood KA-5700 that needs a replacement “pilot light” for the VU meters.
    Kenwood part number: B30-0132-05
    Type: Pilot lamp
    Rating: 8 V, 0.3 A
    Mounting: Leaded, soldered
    I cannot find anything close to this lamp at the major electronics online stores. Can you help?
    P.S. I prefer to go with the original incandescent but will consider alternatives if these are hard to come by.
    V
    Hi Dave, Steve from Southern Maine here. Getting my Onkyo TX-2500 MKII back up to proper shape and are in need of a full lamp kit. Incandescent or warm white LEDS preferred whichever you think would be best. A great sounding mid powered receiver I just can't let go of! I also see you are retiring, so congrats and best wishes for a long and healthy future. Let me know my next step.
    Best Regards, Steve
    C
    Hi Dave, NW Ohio here. My JVC MCT-V7E/5109 tuner needs a dial pointer lamp with leads. Can you help me out on this one? I've had this tuner for way too many years, LOL.Thanks,Chuck
    J
    Please contact me regarding my message below as I would want to understand the pros and cons regarding LEDs v. incandescent lamps. Thanks.
    J
    I own a Sansui 9090DB, am 8080DB and 2 - 7070s. I would like to order a lamp kit for the 9090DB & also the 8080 DB and 2 kits for the the 7070s. My understanding is that you offer both the incandescent and the LED lamp kits. I can be reached at my cell at 802-498-5661. Thank you.
    Coolman6564
    Hello Dave! I was directed here by Youtube. I recently inherited my fathers ONKYO TX-2500 amplifier, and I'd love to get her in top shape again! I was wondering if you could sell me the full lamp replacement kit? All the front panel lamps are out, as well as the turning bar lamp.
    Let me know what information you'd need if you are able, and appreciate your time! Thanks! Steve
    stushug
    Hi Dave,
    I need two sets of lamps for a Pioneer CT-F2121 cassette deck. I'd like to get LED's. The lamp for the two VU meters and the one for the dolby light are 5mm wheat bulbs with wires and the tape well lamps are two 30mm x 6.25mm fuse type. Everything is pretty dim, so I'd like to brighten it up a bit, but stay with warm white lamps. They are all measuring 6VAC. Thanks!
    W
    Hello, I’m looking for a complete led lamp kit for an onkyo tx-5000. Light blue is preferable, with warm white as backup, for the five axial tuner and meter lamps powered by 6.3v ac. The indicator lamps for the tuner and input selectors can be warm white. Let me know if there is any other info you need.
    Thank you.
    Rob

    Just read somewhere you might be retiring from the lamp business. Hope not!
    T
    Hi, I'm looking for a complete lamp kit for a Kenwood KR5600.

    I've increased the quantity in order to have a few spares on hand.

    Function Qty Rating Part # Notes
    Dial 7 8v, 300ma B30-0069-05 10mm globe bulb in rubber grommet base with 2 wires.
    Meters 4 8v, 200ma B30-0068-05 10mm bulb in rubber grommet base with 2 wires.

    Thanks.
    lmdavis
    Hello Dave!
    I am interested in purchasing 2 sets of incandescent lamps for a Marantz 2270 and heard that you were who I should reach out to for that. Please let me know what you need in order to begin that process.
    Thanks so much & looking forward to hearing from you!
    Best,
    Lisa Davis
    Vangoat
    Hello Dave, I have just purchased an Onkyo M-504 amp. and would like to upgrade the lamps to green LED's lamp kit to increase the brightness. If you are still in business could you please help me out.
    Thank You, Bryan
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Back
Top Bottom