• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

1970 JCPenney Speakers

DonQuixote99

just give me some truth
Title is how the seller identifies these. That makes them MCS, probably made by Pioneer, right? Anybody ever seen the like?

attachment.php
attachment.php


$30.00 asked. Not affiliated.
 

Attachments

  • 3n83k53lc5V35O45P4a5nb906246372351335.jpg
    3n83k53lc5V35O45P4a5nb906246372351335.jpg
    5.8 KB · Views: 231
  • 3n23kd3l35V35T15R2a5n91e7bf7df3761544.jpg
    3n23kd3l35V35T15R2a5n91e7bf7df3761544.jpg
    4.3 KB · Views: 227
Register to hide this ad
Made by Technics. A good speaker for $30! They will surprise you.


+1. They could be model 8330 or 8320. Both under rated, IMHO. My nephew found his 8320s on craigslist for little money, and he likes them a lot.

Go for it
 
They were almost identical to either Technics model SB-L200 or SB-L300, depending on if the woofer is 10" or 12". The Technics version had horn tweeters, the MCS used cone tweeters.
 
Those are the ones with time-aligned drivers. The tweeter sits behind the plane where the woofer/mid sit.
 
They are now in the house. Got 'em at a discount. Piccies attached. First shot shows them next to a Boston A60. They are bigger--ported 3-ways with the 10" woofer.

Time-allignment sounds like a good idea in theory. You don't see that design feature very much though.

And first listening impression is that they are accurate, efficient, bold and very bright. Maybe bright enough to say the bass is awol--I'll get back to y'all....
 

Attachments

  • 8320s front w A60.jpg
    8320s front w A60.jpg
    75.8 KB · Views: 136
  • label.jpg
    label.jpg
    77.8 KB · Views: 60
  • terminals.jpg
    terminals.jpg
    83.8 KB · Views: 38
Last edited:
They had plenty of bass when I listened to them. Check phase. Also check to see if the foam surrounds have started to rot, if they are, there will be a big compromise in the tuning of the cabinet.
 
Phase checks ok. It may well be the surrounds. They are intact, but have a slightly 'dry' feel to them. They look original.

Bass definately awol. I fed them some cello, and compared to the A60's, the low notes came out like foghorns. Definately lacking a lot in timbre and resonance.
 
Last edited:
Did you try holding in the reset button for a few seconds? A longshot, but maybe that will fix it.
 
Well, I pressed them when I hooked up the speaker. I'll do what you suggest, and make triple sure all the drivers are energized...

...and they are. I strongly suspect I'm looking at new surrounds.
 
Yeah, I never asked the guy where the 1970 date came from.

Date code is C206 on both of them.

C206 would mean they were made in June of 1982.

So those foam surrounds are ripe for replacing. :D

Fingers crossed that they sound good after that.....:yes:
 
OK Rob, that makes sense both in that it's time to replace them, and in explaining why they aren't falling totally apart at this point.

Glad you had the date code info. Thanks.
 
any one can tell me what the year of or any info for my MCS 683-8227 with a date code of 807c?

Hi dartman - Here is what I have on them from my 1979 catalog:

acoustic suspension design with 3/4" thick cabinets

12" woofer with 38oz. magnet and 2" voice coil
2" soft dome midrange with 25oz. magnet
1" soft dome tweeter with 10oz. magnet

power capability 25-100 watts each

3 position midrange and tweeter control

crossover frequencies of 600Hz and 2000Hz at 12dB per octave

8 ohm

the date code of 807 means they were manufactured in July of 1978.

I hope this helps! Only the model 8228 speakers were better that year - and those are very rare.

Rob
 
683 - 8228
Shipping weight is 100 lb each.
Drivers made by United Speaker who has products used in some Macintosh.
Company owned and operated by Bill Hecht, inventor of the dome tweeter.
 

Attachments

  • IMG_20191205_094026.jpg
    IMG_20191205_094026.jpg
    58.3 KB · Views: 52
  • IMG_20191205_093959.jpg
    IMG_20191205_093959.jpg
    32.6 KB · Views: 44
Back
Top Bottom