Wes_in_VA
Super Member
I started writing about this idea over in a thread about looking for bass augmentation for my Aiko speakers. I had been asking about ideas and wondering whether bucket subs would be good choice since they're easy to make and look like fun. I had been pondering ideas of how to do the project on the uber-cheap.
Here's what I posted in that thread about the genesis of this mad scientist idea of mine:
I've had a bit of time to start actually pondering the details of my madness.
First of all, I have two main goals with this: 1) I want to learn and 2) I want to have fun.
I'm actually pretty thrilled with the sound of my system right now, so if this ends up being better than what I have so be it.
Since learning is #1 on that list, please, comment, educate me.
I started looking into the TS parameters of the recommended Peerless driver for the bucket subs versus the numbers that Human Speakers provide for their replacement driver for the 6" woofer in the Epicure 11. (I couldn't find numbers on the original so this is the best I can do.)
First thing I realized is that my guess that the 3 1/2 gallon bucket would be good was way way way off. The volume numbers for the Peerless versus the Epicure driver were actually pretty close with the Epicure needing slightly larger. I'll stick with the 5 gallon buckets.
The other numbers are pretty good for these Epicures, as I understand them...and I may be WAY off in my understanding, so educate me at your will.
The Epicures have a lower Fs at 32Hz vs 42 Hz for the Peerless.
The Epicures are more sensitive: 89 vs 86
Total Q of the Epi's is .55 vs .66
With my very limited understanding of all this, it seems to me that this project is worth a try even if the only goal is better sound. Whether my thinking that the smaller driver of the Epicure woofer is better suited to my small room I have on idea. That thinking could be horribly flawed but I'm okay with that. Life has taught me that we're lucky if only 49% of our thinking is flawed.
My Mini DSP shipped yesterday and I should see that late this week or early next. I'll pick up the buckets and other materials this week and build the subs this weekend. I'll post updates along the way.
I'm mad, I tell you, MAD!! Bwah hah hah hah hah!!
Here's what I posted in that thread about the genesis of this mad scientist idea of mine:
Okay, so crazy idea here:
My room is quite small so I'm thinking that 2 bucket subs using the Peerless 8" woofer would be overkill. One standard bucket sub probably not so good.
So here's where it gets crazy:
I love the performance of these little 6" woofers in the Epicure 11's that I've mentioned. It got me to thinking...
What about "mini buckets" using a 3 1/2 gallon bucket and the woofers from those Epicures??? (Yes, I've gone off the deep end...)
Those woofers were used in both ported and sealed enclosures so that's no problem.
The 11's were rated down to 38Hz which according to my ears is about right.
I think a 3 1/2 gallon enclosure is about the right size.
The truly crazy part is that I think I'll start out driving them with a pair of Eico HF20 monoblocks. Those have driven the Epicures well in the past so I think it's worth a shot, and soon the Eicos will be pulled out of my living room system living them feeling all lonely and unloved.
I have a Mini DSP on the way to began the mad experiment.
Please, don't call the padded van on me yet. I think this could be fun.
I've had a bit of time to start actually pondering the details of my madness.
First of all, I have two main goals with this: 1) I want to learn and 2) I want to have fun.
I'm actually pretty thrilled with the sound of my system right now, so if this ends up being better than what I have so be it.
Since learning is #1 on that list, please, comment, educate me.
I started looking into the TS parameters of the recommended Peerless driver for the bucket subs versus the numbers that Human Speakers provide for their replacement driver for the 6" woofer in the Epicure 11. (I couldn't find numbers on the original so this is the best I can do.)
First thing I realized is that my guess that the 3 1/2 gallon bucket would be good was way way way off. The volume numbers for the Peerless versus the Epicure driver were actually pretty close with the Epicure needing slightly larger. I'll stick with the 5 gallon buckets.
The other numbers are pretty good for these Epicures, as I understand them...and I may be WAY off in my understanding, so educate me at your will.
The Epicures have a lower Fs at 32Hz vs 42 Hz for the Peerless.
The Epicures are more sensitive: 89 vs 86
Total Q of the Epi's is .55 vs .66
With my very limited understanding of all this, it seems to me that this project is worth a try even if the only goal is better sound. Whether my thinking that the smaller driver of the Epicure woofer is better suited to my small room I have on idea. That thinking could be horribly flawed but I'm okay with that. Life has taught me that we're lucky if only 49% of our thinking is flawed.
My Mini DSP shipped yesterday and I should see that late this week or early next. I'll pick up the buckets and other materials this week and build the subs this weekend. I'll post updates along the way.
I'm mad, I tell you, MAD!! Bwah hah hah hah hah!!
