• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

MCS 683-8227 speakers

wjahn5

Well-Known Member
Anyone had any experience with these or know who made them for MCS?
 

Attachments

  • MCS speaker 1.jpg
    MCS speaker 1.jpg
    110.3 KB · Views: 281
Register to hide this ad
Oh, THOSE things. AFAIK, they're either made by Coral or Becker... or maybe both (cabinets by Coral, drivers by Becker?)...

IME, not bad. Definitely not a throw-away. Not worth much resale, but decent stuff inside, and sound pretty decent.
 
Yes - the parts seem to be very un-like the usual MCS speaker. They are extemely heavy.
 

Attachments

  • MCS speaker 2.jpg
    MCS speaker 2.jpg
    154.9 KB · Views: 249
  • MCS speaker 3.jpg
    MCS speaker 3.jpg
    147.6 KB · Views: 197
  • MCS speaker 4.jpg
    MCS speaker 4.jpg
    179.9 KB · Views: 169
  • MCS speaker 6.jpg
    MCS speaker 6.jpg
    139.3 KB · Views: 210
I've got a set of these! IMO they kick. Lots of bass and great balance. Open and warm sounding. Mine all have very heavy ceramic mags like in the above photos. I've been told they are early USA made MCS models.
4d1a0c84fbb2daadaf5d8c44ca2d71bd.jpg
 
Funny that you said they kick, I refoamed a pair of these for a friend, and once they were up and running again, I did some listening (I have always been a sucker for dome mids and highs) and the thing that struck me was that there was like NO bass.....at all, to the point where I ended up checking polarity multiple times just to make sure I hadn't swapped leads internally. No matter what, they just sounded lean. I was very disappointed. I am glad that yours work better.
 
I had a pair of the earlier version. Same drivers but no wood grain on the face. Not bad sounding speakers. Put some nice film caps in the cross over and they should sound better.
 
Funny that you said they kick, I refoamed a pair of these for a friend, and once they were up and running again, I did some listening (I have always been a sucker for dome mids and highs) and the thing that struck me was that there was like NO bass.....at all, to the point where I ended up checking polarity multiple times just to make sure I hadn't swapped leads internally. No matter what, they just sounded lean. I was very disappointed. I am glad that yours work better.


I'm sorry to hear that. Yeah mine have always performed deep and solid. Most of my friends ask me to turn them up as soon as they get to the house because the lows are so thick haha
 
most likely made by technics they made some speakers for jc penny's


From what I understand, there was a line made in the USA and a line from Japan. Most likely the Japan line was Technics, but I'm not sure who would have supplied the U.S. Models. @hifirob2 seems to know a lot about these (but I'm not sure how to link someone into a thread)
 
From what I understand, there was a line made in the USA and a line from Japan. Most likely the Japan line was Technics, but I'm not sure who would have supplied the U.S. Models. @hifirob2 seems to know a lot about these (but I'm not sure how to link someone into a thread)

While Technics DID make speakers for MCS, none of these first generation were. The first generation Japan made ones were the speakers that came with the NEC made component pieces as part of their rack systems - models 8237, 8247, 8235, 8245, and 8265. Since NEC most likely did not make their own speakers, it's not known exactly who made these for NEC.

The USA made ones were made by United Speaker, and included models like the 8225, 8226, 8227, 8228. The USA ones had the soft dome midranges and tweeters that were so nice sounding.

Here's a fun MCS speaker thread:

http://www.audiokarma.org/forums/showthread.php?t=489994
 
Back
Top Bottom