I have had this wonderful old amplfiier for around 8 years. I got it completely factory, and somebody shorted out the lamp circuit. Easy fix luckily!!
Worked great after clearing the short. The entire time I've owned the amp, it has had this strange behavior when I set it to 4x channel bridge...
I designed an input board for the Soundcraftsmen PCR800, PM840/860, and similar amps. It will also work on the A5002 or most amps in general with the correct power source. It uses the built in +/- 15V supply in the PCR style amps. It provides a buffer for the input to the amp and will accept...
I have a Kenwood KR 6050 and was curious if can be bridged? 60 watts per channel is decent but i recently got some beefier speakers and was wondering if i use A+B channel option and use both channels on a set of speakers. Would that give me 120 watts? I also dont want to blow up or over work my...
Hi there!
Greetings from Warsaw, Poland.
As the title of the post, I have a little doubt. I recently acquired a Marantz 2250B (European version with possibility of changing voltage to 22Ov). This unit did not have the bridges from pre to main. I saw a series of videos (3) on YouTube of a guy...
Pardon the stupid question, but can you bridge SET amplifier the way you bridge any other amplifiers?
I have seen a lot of cheap DIY SET amp on ebay (like this). Okay, Chinese-made, but SET amp nevertheless. However, they are stereo amp. I haven't seen any cheap mono DIY SET amp kit.
So, can...
Hey folks ... I recently picked up a couple of Hafler DH-220s to play with. I was looking at the manual for the DH-222 bridging kit, which seems absurdly simple. It got me to wondering if it's feasible to bridge this amp using an external apparatus. Initial internet searches have turned up...