• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

horn driver

  1. Isaac C.

    Need help with DIY open baffle speakers using console drivers

    Hello everyone, I plan on making some DIY open baffle speakers using some drivers I pulled from a GE stereo console. My biggest question is what is a desirable baffle width and height to have for the 12" CTS 933C675-4 drivers? My other question is mid-range and tweeter placement? Please see the...
  2. Isaac C.

    Unknown 933C299-2 Mid-range Horn Drivers?

    Hello everyone, I just received a free GE Mid Century Modern Stereo Console and am wondering if anyone is familiar with these mid-range horn drivers? I am asking because I am aware that sometimes the drivers used in this stereo consoles can be quite good. Thank you!
  3. MisterDK

    1-3/8” x 18 TPI Compression Drivers ?

    Wondering if many of you have played with different 1-3/8” x 18 TPI compression drivers. I see that parts-express has a good selection of them and I’m curious to know how Ti diaphragms sound compared to say, a polyimide or phenolic.. Also, if a horn speaker is played at lower volume than it was...
  4. MacMan10-100

    Horn Driver Restoration

    So I'm deep into restoring a set of Speakerlab 7s. When I bought them they were a mess. Foam was shot, pots hard to turn, caps leaking & had been changed out w/ junk. The soldering looked really bad, some wires looked just wrapped together. I'm working on the horn driver now & next up is the...
Back
Top Bottom