• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

mx113

  1. J

    MX113 Low Left Channel

    Hi all. Just finished replacing all of the important capacitors on my MX113. I did not change any transistors, I do not have experience diagnosing transistor issues. Working great with two caveats: - A low hiss on both channels. Happens on both Aux and Tape inputs, and both Main and Tape...
    • Jacope
    • Thread
    • dull hiss hum input left channel mcintosh mx113 output right channel
    • Replies: 2
    • Forum: McIntosh Audio
  2. J

    MX113 Power Switch

    Hi all. I see people often talk about the volume pot/switch on this and similar units, but usually regarding volume issues. Just got a non-working MX113. My issue is that the unit will not turn on at all when turning the knob. I briefly bypassed the switch and the unit lit up like a Christmas...
    • Jacope
    • Thread
    • mcintosh mx113 power switch volume pot
    • Replies: 4
    • Forum: McIntosh Audio
  3. E

    Looking for replacement 24v voltage regulator for MX113

    I have emailed McIntosh but they have not gotten back to me and I cannot find any information anywhere on the internet. the part number is M 065 7726 and the Q201 on the schematic. Anyone have any experience replacing this part?
  4. E

    McIntosh MX113 what is the voltage source for the FM tuner?

    I am trying to remedy the FM tuner, there is no signal, no hum or noise at all. All other functions on the preamp work fine, AM is fine and everything. I am getting a reading of 3v all the back to the IF chassis but I am unsure what components actually supply the correct 24v to the FM tuner...
  5. RPGTO

    Mcintosh Tuner Alignment Central FL local?

    I want to get my Mcintosh MX113 FM aligned and have looked around and don't see any audio service centers in central Florida. I called one of the two listed factory service centers for Mcintosh in Tampa and felt like I was talking to a pawn shop with no information and one word answers...
  6. D

    Is it Stupid to use the Power outlet on Mcintosh Mx113

    Hi Everyone, Is it a bad idea to use the power outlet on the MX113 Pre/Tuner to feed the MC2100 AMP? I really want to try it and it says in the manual to hook the amps to them, but I'm scared it may be a bad match and risky? What do you think? Thanks, John
  7. S

    Starting Restoration of MC2125 and MX113 - Looking for Experienced Input

    All, I am a relative newbie to the McIntosh forum here on AK, but in the past several weeks i have quickly begun to appreciate the significant experience that exists here on the forum. How fortunate for me that i just recently became the proud owner of a beautiful MX113 and a, slightly...
  8. DanBNash

    MX113/MX114 Advice Needed

    I am considering the purchase of a restored McIntosh MX113 or MX114 preamp/tuner. There seem to be a lot of them out there (especially the MX113) in nice condition at reasonable prices. I would like some advice. Does anyone know if this would be a good fit with my other equipment. I am using a...
    • DanBNash
    • Thread
    • advice needed carver mcintosh mx113 mx114 preamp
    • Replies: 5
    • Forum: McIntosh Audio
Back
Top Bottom