• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

quartz lock issue

  1. QSilver

    Pioneer PD1003 IC Solution

    Seeing as this is a Pioneer chip, I figured the best place to say this was here. I've been working on a PL-630 and after some reworking and repairs, discovered that the PD1003 oscillator chip was (mostly) dead, and the motor just gently bounced back and forth. I confirmed it was the earlier...
  2. QSilver

    PL-8 Unsteady quartz lock

    I thought I'd posted about this a while back but after a lot of searching I haven't found anything so here we go. I bought this PL-8 a year or more ago and it wasn't working when I got it. I managed to get the SM from fellow AKer, Beej, so big thanks for that. After doing some probing and...
  3. Halisson

    G6700 no signal pré scaler - Digital problem

    Hello and thanks for reading. I have read all posts about G6700 display faults, etc. Mine is cut, lights do not turn on the center TUNE, but turns the TUNE on the left when identifying a poorly tuned radio. I have a 50mhz oscilloscope, I can not detect any variation from the front end FF-631U...
  4. skynetyt

    Turntable Trio KP-7700 (Kenwood KD-750) speed stability issue

    Trio KP-7700 - it is Kenwood KD-750 just for US market, internally it is the same turntable. Here is the problem: when I press the play button, Quartz Lock indicator constantly flashing and the table cannot adjust speed neither to 33 nor to 45 rpm, but sometimes it locks right away from the...
Back
Top Bottom