• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

right channel no sound

  1. JB8

    HARMAN KARDON 330A - Dead Right Channel

    Crew- I have another 330A, dead right channel, here's were I'm at. Initial testing revealed TR904 was bad so I replaced all four output transistors with 15034's TR608 & TR606 tested bad as well, replaced them with 1220 and 2690 (also replaced on left channel, I did this will all components I...
    • JB8
    • Thread
    • 330a dead channel harman kardon harman kardon 330a right channel dead right channel issue right channel no sound
    • Replies: 10
    • Forum: Solid State
  2. S

    Optonica SA-5206 A+B Right Channel Out

    Hello! This is my first post and I'm hoping to get some help troubleshooting my Optonica SA-5206. Both the A and B right channels are out. I think there's a blown fuse and I have some replacements ordered. What I'm curious about is why that fuse might have blown. I've had the receiver for 8...
    • sallywalker
    • Thread
    • blown fuse channel cut out fuse blow optonica right channel no sound right channel not working
    • Replies: 4
    • Forum: DIY
  3. Isaac C.

    Tonearm Help! Left Channel Fine, Right Channel No Sound and Hum

    Hello everyone, I just completed my first tonearm rewire on a Syntec S-220 with KABUSA supeflex and Cardas solder and have run into a bit of a problem. The left channel works fine and sounds fine, however the right channel has no sound and a ground hum. What is weird however, is that if I loosen...
    • Isaac C.
    • Thread
    • ground hum ground loop hub left channel works no sound rewire right channel no sound syntec s 220 tonearm
    • Replies: 23
    • Forum: Turntables
Back
Top Bottom