Hi all,
Awhile back I got a great deal on a Yaqin MC 13s Tube Amp and I've really become addicted to it. I've played with the tubes in the pre section and currently have Tung Sol Ax7's and NOS GE AU7's. I'm finally ready to roll the power tubes. It currently has the original 6CA7's. I'm wanting...
I have a quad of strong, vintage Tung-Sol 6550s (marked RCA) that I want to use in my bone-stock Yaqin MC-100B. I've seen posts here and elsewhere saying the T-S 6550s have been used in this amp before, but no mention of bias voltage. The factory-recommended bias voltage is 0.55V (even says so...
I recently bought a used Yaqin MC-100B that came with all the stock tubes. I've rolled the 6SN7s and 12AX7s with vintage tubes I have stashed away. Unfortunately, the filament died on one of my rolled 12AX7s (a Telefunken smooth-plate, no less. Grrr...). After the T-Funk half-died I put the...
It's been over 8 years since I bought the Yaqin MC-10L (you can read my original thoughts on the amp here) integrated amp, and almost 6 years since it's been in regular use. Indeed, it hadn't even been powered up since the completion of the Sub-Compact DIY speaker project finished in December...
I'm experiencing an odd problem with a new to me Yaqin MC10. Things seem to be working properly but the amp sounds excessively trebly and there is almost no bass below 80hz. The speakers are phased properly and rated to 92db so they should be efficient enough to be happy with this mid powered...
My phone pre went on my vintage Yamaha CA610 integrated amp so I decided to treat myself to a new phono stage. My system includes the Yamaha CA610 (70's), Systemdek IIX turntable (90's) loading with the stock arm and Denon DL110 High Output MC cartridge with diamond stylus. I appreciate tubes...