2225 Light Problem...

[KISSKRAZY]

I just replaced all the lights in my 2225 because when I got it, they were all out. So, I replace them, then fire it up and it all turns on, except for the lights. Is there a blown fuse somewhere that's stopping them from working?

Thanks!

 

[catrafter]

Probably F802 on the P800 power supply board has blown. Now you need to ask yourself why.

Tom

 

[KISSKRAZY]

Could you show me on a picture where this is?
Thanks!

 

[catrafter]

I don't have the service manual on this one, just the schematic. It is one of the two fuses circled in the picture below.

Tom

 

[KISSKRAZY]

Thank you I'll see how to go about replacing it.

-Ben

 

[buzzz57]

I just replaced all the lights in my 2225 because when I got it, they were all out. So, I replace them, then fire it up and it all turns on, except for the lights. Is there a blown fuse somewhere that's stopping them from working?

Thanks!

First thing, are you sure that you have put lights and not simple fuses instead ?
I don't take you for a dumb, but it seems to be a common error with Marantz fuse type lamps.

 

[KISSKRAZY]

Do you really think I'd over look that? I ordered the proper lamps from 'that auction site' and waited about 2 weeks for them to get here.

 

[archie2]

Make sure your light bar is not grounding out to the chassis.