2225 relay

[Jonstigator]

I am looking for the right relay for my 2225 refurb. After much digging around in this unit I think this may be the cause of my left channel issue.

I took the relay off the amp board and removed clear plastic cover. I held contacts closed while checking with a meter. One side had intermittent contact and the contacts had some arcing on them.

I would really rather replace this than clean the contacts. Its out so why not.

The PN in the manual is MY-2z-02 24v.

Also, I have a copy of the 2225 manual (not 2225l ) I bought on ebay after much searching around for a downloadable one. I would like to get it posted for all to use on AK. Who do I send the pdf to.

Thanks

 

[Jonstigator]

I just ordered from a relay from digikey. Digikey PN Z2633-ND and Omron PN MY2-02-DC24. I hope this is it.

 

[rBuckner]

I'm pretty sure that's the right one.

 

[Jonstigator]

I just ordered from a relay from digikey. Digikey PN Z2633-ND and Omron PN MY2-02-DC24. I hope this is it.

Yup, that was it. Fits like a glove and the internals are the same as the original.