simplyvolkol
New Member
The deck itself works extremely well electrically however the idler for moving the spindles jumps around sometimes. I once cleaned the pressure pad (felt) on the motor that is to exert force on the idler (the idler is connected on the motor and the motor turning presses it up to the rim of the spindle)
This deck looks like it passed through someone before me as the plate covering the mech is gone, some screws are missing and lo and behold, the E clip that hold the idler in place is bent. I tried to straighten the E clip but it didn’t help much
All help is appreciated
This deck looks like it passed through someone before me as the plate covering the mech is gone, some screws are missing and lo and behold, the E clip that hold the idler in place is bent. I tried to straighten the E clip but it didn’t help much
All help is appreciated