• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Altec A7 rehab

thymanst

Minnesota morning
I got the new/fixed drivers back from Great Plains Audio today and assembled them into the 828 cabinet - I picked the Votts up locally from a guy who took them out of a hotel stage in Miami Beach - He had replaced the woofers with Sebring DDS-1 Utah 15's (wrong ohm 8 instead of proper 16 ohm) and one 806a that was low output - I sent the 806's to GPA (to re- magnetize ) and ordered two new 416-16c's (they sure are pretty) the one 806 had a bent pole piece that Bill@GPA easily fixed :thmbsp: - the horns were in the ports in the cabinets (they lived in box in air next to stage) they were a gloss black that just didnt look right so I painted them grey and moved the horns up top. I made the port size to 75in. - the guy had fgrill covers that covered the whole front and covered the bass bins - I cut the grills to half size to cover the bottom - I think they turned out pretty nice and sound excellent (although they need a ton of room to operate) I took photos of the process....

1aaltec.jpg

DSC_0001.jpg

DSC_0004.jpg

DSC_0010.jpg

DSC_0012.jpg

DSC_0017.jpg

DSC_0022.jpg

DSC_0025.jpg

DSC_0026.jpg
 
Register to hide this ad
very nice!
since you painted it over and didn't have original finish to start with, why not buy the new production stickers and make it neater? just a thought.

anyways, that's a great paint job. i bet it sounds awesome as well.
 
The stickers are original to them - they are from 1965 ( almost as old as I am) at least the 806a's are - Bill also replaced the diaphragms in both - the speakers have been playing all day and I'd assume some break in is required - my wife has been singing along since she got home so that's always good sign...
 
I have a question about the single control on back (N-800-e crossover) - what does it boost? it goes to 0 to +6 - is it the highs?

thanks,Scott
 
I've been playing around with the HF control (it cuts highs not boosts) and the port size - the bass is easily controllable by decreasing port size - my room is 30x18 with vaulted ceilings - I also tried some open cell foam around horns (cut like my model 19's have) I think these tweaks make them more home friendly -
 
Back
Top Bottom