• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Altec N501-8A Crossover ID please

pantoramasan

AK Subscriber
Subscriber
I need help in identifying the year these were made and if these caps need replacing. They were connected to speakers which are in a home made cabinet consisting of 2ea. 15" JBL 130-B speakers (1950's)and one 375 horn driver with potato masher front, in each cabinet. When I hooked these up, the bass was extremely weak. Could this be due to bad Capacitors?
 

Attachments

  • IMG_0709.jpg
    IMG_0709.jpg
    94.7 KB · Views: 39
  • IMG_0710.jpg
    IMG_0710.jpg
    96.9 KB · Views: 29
  • IMG_0711 (1).jpg
    IMG_0711 (1).jpg
    87.4 KB · Views: 26
  • IMG_0712.jpg
    IMG_0712.jpg
    72.9 KB · Views: 27
  • IMG_0713.jpg
    IMG_0713.jpg
    61.2 KB · Views: 24
  • IMG_0714.jpg
    IMG_0714.jpg
    75.6 KB · Views: 24
  • IMG_0716.jpg
    IMG_0716.jpg
    100.6 KB · Views: 25
  • IMG_0719.jpg
    IMG_0719.jpg
    75.4 KB · Views: 23
  • IMG_0721.jpg
    IMG_0721.jpg
    76.7 KB · Views: 24
  • IMG_0722.jpg
    IMG_0722.jpg
    61.1 KB · Views: 25
Register to hide this ad
Probably not. Have you measured the impedance of the two woofers? Are they wired in series or parallel? If you have a loose woofer handy, connect to the crossover's output and see what kind of sound is produced.
 
BTW, I did some research and evidently the older crossover is roughly from 1971 and the later one from about 75'.

Yes I measured the impedance of the 4 total woofers, actually a friend did. They all have good readings. I just can't get much of a bass out of them. A friend suggested that perhaps the cabinet wasn't sonically thought out. If that makes sense? maybe I'm not describing it well. And I thought it may be old and tired caps...
 
Back
Top Bottom