Any info on any new Yamaha two-channel or home theater products for 2026?

[bergun]

As a Yamaha fanboy… For the last 40 years, I was wondering if Yamaha was going to release any new products in 2026 or even toward 2027? Personally, I’d love to see some new products like a new quality Integrated Amplifiers and a CD player that fits within their old CD-S1000 and CD-S2000 series from the mid 2000s.

The only suggestion I’d like to offer Yamaha, to any additional features on any of their Integrated Amplifiers and 2 Channels Receivers is the inclusion of a Processor Loop/Coupler, like in the past, or even a “Rec Out” feature… Yes, I know their YPAO feature on some of their products, has done away with the need of any processors of the past, but “I” like to have options for my own tastes… Most of my original late 1970s to mid 1980s vinyl LPs have seen better days and tweaking an EQ, in my situation, would be a benefit to my aging ears.

Also, a new Home Theater Preamplifier/Processor and a multi channel Power Amplifier.. WITHOUT the plastic top covers.

Honestly, I’ve been looking at Onkyo newer products lately, but I cannot seemed get past my love/loyalty for Yamaha products.

 

[ChristopherP]

 

[jayvis]

If they'd add some more power and maybe an analog equalizer to the current top of the line A-S3200 integrated, it might be worth a look.

 

[charles 1973]

When I bought bought my RxA770 Dolby Atmos AVR the replacement model was available. But after reading glowing reviews from both the press and owners alike about this line of AVR's. I wasn't going to chance it that it's replacement would not be up to par. And never regretted it.

I have never owned a Yamaha until recently, Though I've always respected them. Now I have 3 of them. The aforementioned Rx A770, and Rx V485 AVR's, and the FG800m, that's an acoustic guitar. Love them all. Did you know Yamaha is at as least as well respected in musical instrument industry and home audio equipment.

As far as high end audio goes, Yamaha has some very tough competitors to contend with, like Accuphase and Bryston.

 

[Soundscape]

Crutchfield usually has the latest stuff but I don't know much about them. I'm still stuck in the 80's, but am curious.

 

[nakmandan]

I saw their new gear at the AXPONA show in April. VERY nice! They had plexiglass covers so you could see inside, LOTS of high quality components in there. Nichicon Fine Gold caps (which Nichicon has since dropped the whole line), a huge toroidal transformer, high quality boards... they did things right in the build quality.

 

[Soundscape]

I'm looking for a new Yammie under 500 bucks that tosses my salad.

 

[dr*audio]

I wouldn't buy any Yamaha product anymore. I recently serviced a RN-602 receiver. The schematic was full of non supplied parts, written right in the schematic. That means if any of the large scale integrated ICs fails you'd have to buy an entire board (if they are still available) or you'll have a boat anchor. If you can find an amp or receiver that has mechanical switches and volume control (no remote) then it probably has no processors in it and you're safe. Here's an excerpt from the manual:

 

[whoaru99]

IMO, only a select few, which means mostly vintage 1%ers, expect unlimited serviceability.

Things tend to follow a bathtub failure curve. Either they fail early, probably still in warranty, or they last a long time and failure due to age/wear out is way down the road.

Of course, there is always an exception and sucks if it's you, but should not be held as the norm, rather the exception it is.

 

[Soundscape]

I guess the RN series means Repair No.

 

[dr*audio]

It's not a Vintage VS New issue. I am an advocate of Right To Repair. People have a right to know if their prospective purchased equipment is going to be supported by the manufacturer, both with schematics and replacement parts.

 

[mbz]

Good luck trying to solder that 128 pin cpu in place, working, without damage...
Yeah, PITA to buy the board, had issue with an RX-V3900, board was $40-$50.
Another vote for vintage.

 

[whoaru99]

I am an advocate of Right To Repair.

Me too.

That said, right to repair doesn't mean the mfg. must support a unit at individual ICs, etc., if they make higher level assemblies/board available and that seems to be the way of the world these days.

Arguably, in a somewhat perverse way, that could mean the unit is actually more serviceable as I'd guess more people could swap a board, if so inclined, rather than change out a big/large scale IC type of thing.

 

[Soundscape]

At this rate nowadays IMO...we're gonna spend a grand on a piece with 4 feet and one big azz chip inside...hoping it makes sound for more than 5 years.

Vintage Jones

 

[dr*audio]

At this rate nowadays IMO...we're gonna spend a grand on a piece with 4 feet and one big azz chip inside...hoping it makes sound for more than 5 years.

Vintage Jones

Well that's the other dark little secret that nobody tells consumers. All the processor IC's that make it possible to do surround sound and have DSPs that can shape the sound, and the multiple switching ICs that use FETs to route the signals and switch between sources; all of them are extremely static sensitive and sensitive to power surges. You can get a surge protected outlet strip but how many people know that in the Winter when you walk across the room to touch the equipment you should discharge yourself to something else first? Damn few, and that's a reason for short life in these products. That and cheap Chinese caps.