Grid
Active Member
I have a 667A. The original 2" coiled cable was replaced. Can not find that type of mic cable. Also can not find the pins that go into the sockets inside the rear of the mic. I don't even know what those pins are referred to as. Have a pretty good idea these are an Amphenol item but to find the exact ones...pins in the haystack.
I'm about to give up on it and just use smaller AWG mic cable, desolder and salvage the pins that are on there now, and use layers of shrink tube to form the insulating boots on the pins. And of course a strain relief bushing.
Thank you.
I'm about to give up on it and just use smaller AWG mic cable, desolder and salvage the pins that are on there now, and use layers of shrink tube to form the insulating boots on the pins. And of course a strain relief bushing.
Thank you.