AR-4X Cap, L-Pad photos

[Bhorn]

AR-4X Replace capacitor, and pot.
Have new L-Pad, New Cap from vintage-AR.
Their diagram shows connection of new L-Pad, and new cap install. It doesn't show connecting new L-Pad to new cap.
Need photos of new to new connection.
Found photo on line, picture quality is poor, and unable to discern proper connections.
Thanks bhorn.

 

[45rpmspinner]

The pics show the original crossover.....which used a potentiometer, not an L-pad.
The wiring is somewhat different.

With an L-pad, one of capacitor leads connects to tab no.3.
The other lead connects to the backing board at the same place as the red wire going to the woofer [the blue wire as seen in the pics of the original crossover].
Doesn't matter which lead goes where as the capacitor is undoubtedly non-polar.

If your L-pad tabs are unmarked, you'll need to look at one of the many diagrams online.
But keep in mind orientation, as your L-pad will be facing the opposite direction when installed.

Hope that helps.

 

[markkb]

Welcome to AK, if you still need further information. You can ask at Classic Speakers Pages in the AR forum. You can also try Larry at Vintage AR.

Home Page | The Classic Speaker Pages