• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

Arcotronics = Kemet? Tayda Electronics?

c.coyle

Fighting the Dunning-Kruger effect.
Tayda Electronics is selling stacked polyester film caps, box type, for very attractive prices. The brand name is "Arcotronics", but the description says R82 series, which is a Kemet designation.

Anybody know if Arcotronics = Kemet?

I just bought some TIP122 transistors from Tayda, the price was low, the service quick, and the parts appear genuine. Anybody know about these guys?
 
Register to hide this ad
They are here, 10 each 1.0uf and 0.47uf. They are battleship gray, have no manufacturer's markings that I can see, and are comparable in size to Kemets and Wimas. Construction, finish, and lead heftiness also look comparable.

1.0uf were 21 cents U.S. a piece. 0.47uf were 20 cents.

The 1.0uf all measured within 5% of marked value, half high, half low. ESRs measured between 0.69 and 0.77 ohms. Half measured 0.00% Vloss, none had higher than 0.2%.

The 0.47uf all measured within 5% of marked value, every one high. 9 out of 10 measured 2.5 ohms ESR; the tenth, 2.6 ohms. Highest Vloss was 0.1%, with three measuring 0.00%

Looks like they might be a good value in non-critical applications.
 

Attachments

  • Arcotronic Films.JPG
    Arcotronic Films.JPG
    48.2 KB · Views: 17
Back
Top Bottom