I now have two Audionics CC-2 amps and looking to connected them to one BT-2 preamp separately. On each CC-2 will be an 8 ohm L & R channel 3 way speaker system. One speaker system consist of Electro Voice speakers and the other University speakers 3 way. Both systems with own woofers. no sub-woofer at this time. Want to try this with the two amps separately producing the total combined sound of all speakers. Then may just designate one speaker system to mid base, mids, and highs. The other to low base. Note in the Electro-Voice two speaker enclosure's each contain two 15" woofers. Question is this possible? I did this using the Carver C-2 pre amp and all was good. Only thing is the Audionics CC-2 with the BT-2 was a better sounding system. The BT-2 made all the difference out performing the Carver C-2 or the C-11. Both speaker systems are 8 0hms
Last edited: