• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

automatic functions on a BSR turntable?

phonophan79

New Member
Greetings -

So, this is my first time venturing inside to perform repairs on my own.

My guinea pig is a $5 garage sale find - a Mitsubishi MGA ST-26 (or 70s BSR) turntable.

It was seized and I successfully unseized it - it works and plays now, save for the automatic functions.

Here is a short clip of what is (or isn't) happening:

Any help is greatly appreciated!
 
Last edited:
Register to hide this ad
Hi,

You must have the platter fitted for the auto functions to work, otherwise no drive.

Manually rotate the big cog to the right of the spindle to work out what is going on.

Work out what causes it to engage and disengage with the platter gear,
and how they get all the auto functions to work. For BSRs and very
similar Garrards I used to know it all but it was a very long time ago.

Many fixes were simply getting the mechanism back to the proper starting state.

rgds, sreten.
 
Last edited:
Hi,

I very much doubt it boiled down to platter placement, that should not matter.
It may have just needed the platter fitting, or that and resetting properly.

rgds, sreten.
 
Back
Top Bottom