• The move to the new server is done. There are some software and database maintenance updates in process. This has us passing the hat around to help out. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html

B-2102 & C-2102 new addition pair !

Hyperion

Roobarb & Custard
Subscriber
I took delivery of a very nearly perfect condition B-2102 and C-2102 yesterday. :banana:

They are said to have been 'seller refurbished', some work has clearly taken place, I can see that the work done is not up to my standard, (glue not removed, etc) so I have a little work to do :)

Adjustment checks revealed DC offset was close enough, but 2 (1 left, 1 right) of the 4 bias settings were set far too low.

Did some listening last night - very pleased indeed with them.

If you are all very good, I might post some pictures later :D
 
Last edited:
Register to hide this ad
Congrats John on getting hold of this excellent Pre & Power set.
...and know that after the "Hyperion" restoration touch they will shine even more - :yes:
 
As promised - some pictures

Pic 1 - Some capacitors changed, but glue left behind! also original trimmer(s).
Pic 2 - Top cover off, looking down into the beast.
Pic 3 - Front view top cover off.
Pic 4 - Both together - sorry for poor quality pic (no flash).

These are just a few quick pictures, when I can afford it :sigh: I will be fully restoring them both ;) - more pictures then.
 

Attachments

  • IMG_1499a.jpg
    IMG_1499a.jpg
    65.9 KB · Views: 44
  • IMG_1500a.jpg
    IMG_1500a.jpg
    78.6 KB · Views: 46
  • IMG_1501a.jpg
    IMG_1501a.jpg
    57.1 KB · Views: 42
  • IMG_1505a.jpg
    IMG_1505a.jpg
    54.2 KB · Views: 55
Last edited:
Congrats John. They look prety nice.
The parametric eq is well worth the Money in the pre amp.
And their sound as a combo is quite good.
I remember this combo was presented as a poor man's 2301.
 
Very nice. If mine were in better condition, I would still have them.

That preamp has a bunch of relays in it. I could not find replacements, so I removed them all and cleaned them. I had audio dropping issues.

Have fun with them.

Rob
 
That preamp has a bunch of relays in it. I could not find replacements, so I removed them all and cleaned them. I had audio dropping issues.
Rob

Me too with my C-2101: Almost no signal trough any input. All due to the relais.

And thank you for the pictures Hyperion.

-John-
 
These are just a few quick pictures, when I can afford it :sigh: I will be fully restoring them both ;) - more pictures then.

John,
I don't think when you can afford it !.... I wonder if there is an addiction centre.
Did these use MOSFET's for the outputs ?. I always wondered how the MOSFET's sounded driving a set of speakers.

Nice...
Mano
 
Thanks All,

John,
I don't think when you can afford it !.... I wonder if there is an addiction centre.
Did these use MOSFET's for the outputs ?. I always wondered how the MOSFET's sounded driving a set of speakers.

Nice...
Mano

Thanks Mano, no these are standard bipolars, with the usual Sansui sprinkling of JFETs elsewhere.

MOSFET's driving speakers? - kind of soft and smooth, having somewhat muted treble response, would be how I would describe it.
 
Congrats John. They look prety nice.
The parametric eq is well worth the Money in the pre amp.
And their sound as a combo is quite good.
I remember this combo was presented as a poor man's 2301.

JOMARK is right on the money again - the parametric EQ is a very good feature, yielding much much more than any tone control setup - poor man's '2301 ? - yep that's me. :)
 
You're going to be busy..

Congrats on your new acquisitions... Hopefully you'll still have time to help us out with our issues as well..
 
Congrats on your new acquisitions... Hopefully you'll still have time to help us out with our issues as well..

Oh yes I'll try, but not so hot on receiver issues - 'cos i've never seen one to fix, except the '1000X' I bought and still have, with blown outputs, now fully functional :)

I am almost completely absorbed by Sansui integrated & power amplifiers.

But that doesn't mean I have no time for AK stuff.
 
Last edited:
Back
Top Bottom