These are horrible!
Do I drill holes and just use screw on ones?
Has anyone made a new PCB board for it?
Seems like this is pretty common.
-
Feeling lucky? Check out the AK 24th Anniversary Giveaway thread and join in the fun!
B&K Pro-5 Preamp RCA Replacement?
- Thread starter ivandezande
- Start date
These are horrible!
Do I drill holes and just use screw on ones?
Has anyone made a new PCB board for it?
Seems like this is pretty common.
Register to hide this ad
I bought a cheap phono preamp one time just because it had these nasty RCA's so I could repair a Hafler.
Yeah, You can drill a larger hole and with a few insulators replace with newer type RCA's.
Looks cringe, But it works.
I've seen people pour epoxy over the whole board to fix the RCA's...
Yeah, You can drill a larger hole and with a few insulators replace with newer type RCA's.
Looks cringe, But it works.
I've seen people pour epoxy over the whole board to fix the RCA's...
Last edited:
I wonder if anybody has made a 3d printed RCA board? If they fail a lot maybe?
Problem is, there’s traces and a unique connector on the board, it’s a true PCB.
