• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

B & W Pics

From record stores.
Siren Records in McHenry, IL
upload_2021-6-3_9-51-33.png
upload_2021-6-3_9-53-21.png
Grimey's new location in Nashville (used to be a church. It's two story) Note the crowd size and age.
upload_2021-6-3_9-56-29.png
Bop Street in Seattle (now closed, sadly) My friend with the owner
upload_2021-6-3_9-58-47.png
upload_2021-6-3_9-59-44.png
 
51222533417_bffba117e5_b.jpg
 
Last edited:
That is amazing! Looks like a seriously high quality telephoto helped. :) Were you staking it out quite a while?
Actually the heron had been standing motionless and waiting for its prey quite a while so I approached quietly to a safe distance, with my camera ready, and waited for the shots. I was using a Panasonic Lumix G95 in conjunction with a Lumix G Vario 100-300mm f/4-5.6 II lens at that time.

51224215680_ae2332fb30_b.jpg
 
Here's a neat old photo:

harvestor.jpg

That's my grandfather driving the Best (Caterpillar) Sixty pulling the grain harvester that he and his cousin owned. The man sitting halfway up the harvester is filling burlap sacks with grain, sewing them up, then letting them slide to the ground to be picked up. The man on top has his hand on the handwheel used to raise and lower the header that cuts the grain stalks and pulls them into the harvester.

After the harvester was retired in favor of newer equipment, it sat in the harvester shed for many years. It was eventually given to a friend of the family who wanted to salvage the old engine that ran it.

I ran into him a few years back, and he invited me over to see some of his old engines. We got to talking about the harvester, and he said that unfortunately a fire started in the yard where it had sat, and burned up in the fire (lots of oak used to build the old harvesters). Then he said, "By the way, I managed to save the old handwheel off of it if you'd like to have it". He didn't have to ask me twice.

I know if you refinish smething like this, to some it affects the value. I didn't care. It will never be sold. I disassembled it, glass beaded the hub, steel ring, and fasteners. They then got a coat of clear. I lightly steel wooled the wood spokes, then rubbed them with gum turpentine and boiled linseed oil.

It now hangs above our fireplace. Here it is:

handwheel.jpg
 
Back
Top Bottom