• Check out the Annual AK Secret Santa exchange Program, signup before November 23rd in the AK Charities & Christmas forum!

Best Rega P2 Upgrades

MikeT.

Displaced Irish Cajun
It’s been some time since I posted here but various Rega P2 discussions on the inter webs have caught my interest. Now I’ve owned two Rega Planar 3 tables, a long story, and in both cases I found the sound rather “dry”. It’s the only description that comes to mind, even on a variety of carts. I attribute the dry sound to the double brace technology touts. The P2, however, is dynamic and with much better bass response IMO with several carts I’ve tried, finally settling on the Sumiko Moonstone. The RB220 tonearm is the recent upgrade by Rega with the user-adjustable anti-skate. I’m pretty happy overall but the audiophile bug has returned and has me looking a several upgrade options for my P2.
In order:

1. Aluminum sub-platter and Sapphire bearing.
2. 24V motor upgrade with ability to use the Neo PSU down the road.
3. Stainless steel tonearm stub and underslung counterweight

Not sure about an acrylic platter versus the current float glass.

My first impulse is to go for the motor and PSU upgrade, of course the most expensive. Is the sub-platter and bearing an equivalent upgrade?

Thanks in advance!

MikeT.
 
Register to hide this ad
I went Tangospinner as well.
The counterweight was off eBay, just do a search.
The Groovetracer stuff was too expensive to just 'try' so I went the other route.
Cannot say that how that stuff made a difference as I upgraded carts at the same time.

I think I would trade up and go with a MP7 first, before trying anything else. That way you'll better hear whatever changes the other upgrades make.
My MP7 was by far the greatest change I made.

IMG_1369.jpg
 
Thanks for the input gents. Most reviews of the sub-platter upgrades versus Rega PSU come down on the side of the sub-platters. I’m leaning towards Tango Spinner for the simple fact that I’ve entered and exited vinyl a couple of times in the past and need to take a few positive baby steps and add more records as I go.

The Groovetracer stuff was too expensive to just 'try' so I went the other route.

@theflattire I agree. While I can’t find any negative views on Groovetracer, I can’t find anything negative on Tango Spinner either. You’re also the second person I know who loves their MP7.

I spent the most on the Ania MC cart

It’s good to know the RB220 will gladly accept the Ania MC cart.
 
Very happy with my old P3- 2000 (made long before Rega developed the brace concept) with the Tango spinner Canaro kit and the Darlington MP7 phono preamp. My audio listening has gone from about 50/50 lp's/digital to about 9 out of 10 times the turntable wins the contest for my listening time.
 
Newer, I have the model with the adjustable anti-skate tonearm.

Then you already have a 24V motor. That kit is for upgrading the older pre 2016 turntables which plug directly into the wall. IMO the best upgrade to that turntable is a good cartridge, and perhaps some new records. The P2 is a great sounding unit, it sold me on Rega in general.
 
Very happy with my old P3- 2000 (made long before Rega developed the brace concept) with the Tango spinner Canaro kit and the Darlington MP7 phono preamp. My audio listening has gone from about 50/50 lp's/digital to about 9 out of 10 times the turntable wins the contest for my listening time.
You Darlington fans are making me rethink my priorities. ;) But it’s likely to come down to how much I can afford at the moment.
 
You Darlington fans are making me rethink my priorities. ;) But it’s likely to come down to how much I can afford at the moment.
Well, you already have the MM-6, Talk to Mike - he's a straight shooter and may do a trade in for a reasonable price. I haven't heard the MM-6 (went straight for the MP-7) but I can't imagine that it would be a huge step to go from one to the other as most of the MP-7 technology is already in the MM-6. I did find the Tangospinner to be a significant improvement over the stock plastic sub platter and recommend it.
 
The P2 is a great sounding unit, it sold me on Rega in general.

I’ve always loved Rega’s tonearms and now Rega in general since my purchase of the P2. There are so many possibilities now. Upgrade to better tonearm like the RB330, an upgraded cart, maybe even the PSU but that would require the new motor. I haven’t seen anyone selling just the PCB for the 24V motor which includes the connection for the PSU. The “bones” of the P2 are terrific. I’m a little suspicious of the new foam cores of the P6 upwards.

OK, revised priorities including the new preamp:

1. Tango Spinner Astor sub platter with the Zirconium Oxide bearing and red silicone belt.
2. Darlington Labs MP7 preamp.
3. Then maybe the add on PSU but that may prove unnecessary. Thanks @maxhifi
 
I’ve always loved Rega’s tonearms and now Rega in general since my purchase of the P2. There are so many possibilities now. Upgrade to better tonearm like the RB330, an upgraded cart, maybe even the PSU but that would require the new motor. I haven’t seen anyone selling just the PCB for the 24V motor which includes the connection for the PSU. The “bones” of the P2 are terrific. I’m a little suspicious of the new foam cores of the P6 upwards.

OK, revised priorities including the new preamp:

1. Tango Spinner Astor sub platter with the Zirconium Oxide bearing and red silicone belt.
2. Darlington Labs MP7 preamp.
3. Then maybe the add on PSU but that may prove unnecessary. Thanks @maxhifi

I purchased a P6 last year, and am still thrilled with it.. no so called foam core sag, and definitely sounds better than a P2/P3 which are in their own right excellent machines. The thing about the P2 is it is well balanced as supplied, and upgrading it piecemeal will at an end result cause you to wind up with a DIY P3 at a much higher cost than just selling the P2 and buying a P3. I know the urge to upgrade is sometimes irresistible, but tweakery is hard to recover cost from, and can actually undermine resale value sometimes. Plus there's plenty of anecdotal evidence out there about aftermarket bits and pieces actually making things worse and not better.

I do however strongly support the use of the Edwards Audio brass counterweight, if you can still buy it.
 
Yeah, the P6 would definitely check all the boxes for me. Appreciate your feedback on your P6 @maxhifi :beerchug:

I actually started with the idea of getting a P2 after I repaired one and was blown away by how good it sounded, and ended up with a P6 due to incremental betterness. I really wanted the Neo, and the metal sub platter, and the higher inertia platter, etc.

I still really like the P2 though, I think it's in a way more fun than the P6 due to the value for money and color choices, but ultimately the P6 was chosen due to features and sound.
 
Just ordered the Tango Spinner sub-platter with Zirconium Oxide bearing and red silicone belt. Thanks to all for helping with my decision. Will chime in with impressions.
 
Here's my Rega Planar 2 that I upgraded in multiple ways. I repaired the broken antiskate belt in the R200 arm too.

It has a Peak ceramic bearing well, 16 volt motor with rigid but cork damped mount, TangoSpinner subplatter, double 33 pulley, silicone belts, adjustable feet, Delrin platter. The motor and platter were sourced locally through Pure Fidelity. The motor and dual belt pulley allow me to use a Music Hall Cruise Control to change speed.

The original "P2" has always been my favourite looking Rega and I like that I was able to mod it but keep the appearance.

2021-09-22_09-54-04.jpg

Rega Planar 2.jpg
 
The newer P2 / Tangospinner upgrade kit with Ania cart is a huge value for me since I got the table new for $500 and the cart for $700 and the TS kit for 179 a few years back. A lot less than a P6 with same cart and gave me some xtra $$ for the Rega Fono preamp. Which melds beautifully with the Rega setup.
 
Back
Top Bottom