I have been working on my CA-1000 more. When trying to adjust the function board, I see mine is different than in the service manual. I have LC65101 rather than LC62854. The traces are actually different. I'm wondering if anyone has adjusted this one or knows of a different manual.
I was able to find what seems like the equivalent test points and adjusted to 27.5v.
Another question, perhaps unrelated: I saw in another post http://audiokarma.org/forums/index.php?threads/ca-1000-class-a-issues.686254/page-6 that in class A, the output transistor should be at 18Vdc and 48Vdc. I measured 20Vdc and 52Vdc. Does this seem ok? All of my settings are good: main 15V, mid point and idle current of the left and right main amp.
Overall, I think I'm getting good sound from this amp. I just want it to be adjusted properly.
I was able to find what seems like the equivalent test points and adjusted to 27.5v.
Another question, perhaps unrelated: I saw in another post http://audiokarma.org/forums/index.php?threads/ca-1000-class-a-issues.686254/page-6 that in class A, the output transistor should be at 18Vdc and 48Vdc. I measured 20Vdc and 52Vdc. Does this seem ok? All of my settings are good: main 15V, mid point and idle current of the left and right main amp.
Overall, I think I'm getting good sound from this amp. I just want it to be adjusted properly.
