CA-800 - does anyone have a high rez schematic ?

[MonkeyRelish]

Hi all,

I have finally picked up a CA-800 after looking for a while.
They are a bit thin on the ground here in Australia.
Does anyone have, or can point me in the direction of, a high resolution scan of the schematic ?
The one on Hifi Engine is too low resolution to read values easily.

Thanks,

Mr Relish

 

[mbz]

The HFE copy is poor, you may need to shell out some hard earned,
https://www.analogalley.com/osccart/index.php?manufacturers_id=55

I use the CA-1000 manual/schematic, very close in most areas...

 

[mbz]

CA-800, nice amp, same build/mechanics as the CA-1000 so same switch issues...

 

[MonkeyRelish]

I have rebuilt both a CA-1000 and a CA-600 (very underrated amp).
The 800 has the same function board as the 600, and similar to the 1000 everywhere else.
The 800 is closer to the 1000 than to the 800II circuit wise, especially the amp section.

Mr Relish

 

[MonkeyRelish]

Thanks for the link @mbz , that scan is very clear.

Mr Relish