Capacitor help.

[Xenomorph]

Hi, I have a Rotel RB870BX power amp that I need new main caps for, they are 10000uf and 63v, 40mm wide and 60mm tall.
I can see 3 legs on the underside of the board-I've not taken one out yet.
C613 and C614 on the schematic.
Can anyone help me with identifying what I need please?
Thanks in advance.

 

[mcgjohn]

one of these should work. The extra legs are used for support on the PCB. You can find caps with extra legs but will take some extra effort.

https://www.mouser.com/c/passive-components/capacitors/aluminum-electrolytic-capacitors/aluminum-electrolytic-capacitors-snap-in/?q=10000uf%20%20%2063v&capacitance=10000%20uF&diameter=40%20mm&voltage%20rating%20dc=63%20VDC

 

[Xenomorph]

one of these should work. The extra legs are used for support on the PCB. You can find caps with extra legs but will take some extra effort.

https://www.mouser.com/c/passive-components/capacitors/aluminum-electrolytic-capacitors/aluminum-electrolytic-capacitors-snap-in/?q=10000uf%20%20%2063v&capacitance=10000%20uF&diameter=40%20mm&voltage%20rating%20dc=63%20VDC

Thanks so much, I really appreciate your help.

 

[petes'picks]

Be sure to measure the lead spacing before ordering, newer caps are 10mm spacing, some older caps are 22.5mm.

 

[Xenomorph]

Be sure to measure the lead spacing before ordering, newer caps are 10mm spacing, some older caps are 22.5mm.

I suppose I may have to drill new holes if needs be then, thanks for the info.

 

[petes'picks]

You will probably be ok, most of the multi-pin caps are 22.5mm. You can alway clip the dummy leads and get creative to make em fit.